Abstract:Purpose Surface roughness is an important evaluation index for industrial components, and it strongly depends on the processing parameters for selective laser molten Ti6Al4V parts. This paper aims to obtain an optimum selective laser melting (SLM) parameter set to improve the surface roughness of Ti6Al4V samples. Design/methodology/approach A response surface methodology (RSM)-based approach is proposed to improve the surface quality of selective laser molten Ti6Al4V parts and understand the relationship between the SLM process parameters and the surface roughness. The main SLM parameters (i.e. laser power, scan speed and hatch spacing) are optimized, and Ti6Al4V parts are manufactured by the SLM technology with no post processes. Findings Optimum process parameters were obtained using the RSM method to minimise the roughness of the top and vertical side surfaces. Obtained parameter sets were evaluated based on their productivity and surface quality performance. The validation tests have been performed, and the results verified the effectivity of the proposed technique. It was also shown that the top and vertical sides must be handled together to obtain better top surface quality. Practical implications The obtained optimum SLM parameter set can be used in the manufacturing of Ti6Al4V components with high surface roughness requirement. Originality/value RSM is used to analyse and determine the optimal combination of SLM parameters with the aim of improving the surface roughness quality of Ti6Al4V components, for the first time in the literature. Also, this is the first study which aims to simultaneously optimise the surface quality of top and vertical sides of titanium alloys.

Application of Selective Laser Melting Technology Based on Titanium Alloy in Aerospace Products

Research on the optimal design and manufacture of TC4 titanium alloy structural parts with selective laser melting technology

Research Progress on Technology of Selective Laser Melting of Titanium and Titanium Alloys

Effect of process parameter optimization on morphology and mechanical properties of Ti6Al4V alloy produced by selective laser melting

Current Status And Progress On Technology Of Selective Laser Melting Of Metal Parts

Design and simulation of a bearing housing aerospace component from titanium alloy (Ti6Al4V) for additive manufacturing

Optimising the Process Parameters of Selective Laser Melting for the Fabrication of Ti6Al4V Alloy

Additive manufacturing of titanium alloys via selective laser melting: Fabrication, microstructure, post-processing, performance and prospect

Influence of Typical Technological Parameters on the Forming Quality of TA1 in Selective Laser Melting

Selective Laser Melting of Near-Α Titanium Alloy Ti-6Al-2Zr-1Mo-1V: Parameter Optimization, Heat Treatment and Mechanical Performance

The status and research progress of selective laser melting additive manufacturing

The Development Status of Selective Laser Melting Technology (SLM)

Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review

Laser Based Additive Manufacturing Technology for Fabrication of Titanium Aluminide-Based Composites in Aerospace Component Applications

A Review of Research Progress in Selective Laser Melting (SLM)

Laser Additive Manufacturing of Aerospace Large Metallic Structural Components: State of the Arts and Challenges

Experimental investigation on the factors affecting the quality of titanium alloy overhang via selective laser melting forming

Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy

A Novel Approach to In-Situ Fabricate Ti-6Al-4V Alloy with Graded Microstructure and Property by Selective Laser Melting

Numerical Modelling and Experimental Validation of Selective Laser Melting Processes Using a Custom Argon Chamber Setup for 316L Stainless Steel and Ti6AI4V