Abstract:Galena is a natural mineral enriched with lead sulfide (PbS). It typically forms in hydrothermal veins associated with igneous rocks and can also occur as a gangue mineral in other ore deposits. PbS is of special importance for scientific research applications due to the possibility of tuning its semiconductor energy gap using nanotechnology in conjunction with powder metallurgy as an easy, controllable production route. In this paper, almost pure PbS was successfully produced starting from a high ratio of PbS phase galena ore. As-received galena lumps were roughly pulverized and milled to produce four particle size ranges of 38, 63, 125, and 250 μm prior to compaction and sintering in a vacuum (pre-flushed with argon gas). SEM coupled with the EDAX analysis unit was employed to investigate the microstructure and chemical composition of the as-received galena and the subsequent products after sintering. The chemical analysis confirmed the high ratio of PbS compound in the as-received galena and sintered products with approximately 85% Pb and 13% S mass ratio. The sintering process of the galena powder was carried out at different values of temperature, time, and compaction pressure. Additionally, the effect of length to diameter ratio of compacted and sintered samples was investigated. XRD analysis confirmed the existence of the PbS phase in the as-received and sintered samples at 700 °C with approximately 98 wt.%, as well as a new phase that is formed at 800 °C with a lower percentage. The micro-hardness of the as-received and sintered samples was measured and compared with the as-received galena ore. The results showed a significant reduction in the hardness of sintered galena powder compared with the bulk as-received galena by 52%. Furthermore, a relative sintered density of 99.3% for the as-received galena density signifies a novel result using powder metallurgy techniques.

Synthesis of galaxite by sintering at various temperatures and atmospheres

Impact of the Mineral Composition and Sintering Temperature on the Synthesis of Anorthite Ceramics

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Carbothermal Reduction Nitridation of Fly Ash, Diatomite and Raw Illite: Formation of Nitride Powders with Different Morphology and Photoluminescence Properties

Sintering behavior and microstructure of (1-x)MgAl2O4-xMg2TiO4 spinel solid solutions prepared by isostructural heterogeneous nucleation

Synthesis and Sintering Reaction Mechanism of High-Performance MgO-CaO-Fe2O3 Clinker

Study of Galena Ore Powder Sintering and Its Microstructure

Structure, morphology and mechanism research on synthesizing xonotlite fiber from acid-extracting residues of coal fly ash and carbide slag

Preparation and Characterization of Mg-Al-B Alloy (Mg0.5Al0.5B2) Via High-Temperature Sintering

Low-temperature synthesis of MgxCo1-xCo2O4 spinel catalysts for N2O decomposition

Preparation and Characterization of Porous Mgal2o4 Spinel Ceramic Supports from Bauxite and Magnesite

Rapid Preparation Of Mgal2o4 Ceramics By High-Gravity Combustion Synthesis

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Novel Synthesis of High Surface Area MgAl2O4 Spinel As Catalyst Support

Effect of Synthetic Parameters on Synthesis of Magnesium Aluminum Spinels

Self-Propagating High-Temperature Synthesis of Magnesium Aluminate Spinel Using Mg–Al Alloy

Investigation on mechanical and thermal properties of MgAl2O4-Mg2TiO4 solid solutions with spinel-type structure

Synthesis and Characterization of Porous Magnesium Aluminate Spinel by Hydrothermal Process

Thermodynamic calculation and microstructure characterization of spinel formation in MgO–Al2O3–C refractories

Sol—gel approach to low-temperature synthesis of single-phase metastable La2Ga3O7.5 melilite with enhanced grain-boundary oxide ionic conductivity via a kinetically favorable mechanism

The effect of MnO2 additive on the microstructure and mechanical properties of magnesium aluminate spinel