Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Printed Kirigami Organic Photovoltaics for Efficient Solar Tracking

Kirigami-Based Highly Stretchable Thin Film Solar Cells That Are Mechanically Stable for More than 1000 Cycles

Kirigami‐Based Compliant Mechanism for Multiaxis Optical Tracking and Energy‐Harvesting Applications

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

High‐Efficiency ITO‐Free Organic Photovoltaics with Superior Flexibility and Upscalability

Stretchable and transparent nanopillar arrays for high-performance ultra-flexible organic photovoltaics

Printable and Flexible Phototransistors Based on Blend of Organic Semiconductor and Biopolymer

Organic Photovoltaics Printed via Sheet Electrospray Enabled by Quadrupole Electrodes

Flexible High‐Performance and Solution‐Processed Organic Photovoltaics with Robust Mechanical Stability

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Printing and Coating Techniques for Scalable Organic Photovoltaic Fabrication

A High-Performance Organic Photovoltaic System with Versatile Solution Processability

Highly Efficient Flexible Roll-to-Roll Organic Photovoltaics Based on Non-Fullerene Acceptors

High performance roll-to-roll printed PTB7-Th/PCBM solar cells (Conference Presentation)

Synergistic Optimization Enables Large‐Area Flexible Organic Solar Cells to Maintain over 98% PCE of the Small‐Area Rigid Devices

Low-Cost Fully Non-fused Ring Acceptor Enables Efficient Organic Photovoltaic Modules for Multi-Scene Applications

Advances in Stretchable Organic Photovoltaics: Flexible Transparent Electrodes and Deformable Active Layer Design

Fully Printed and Industrially Scalable Semitransparent OPV Modules: Navigating through Material and Processing Constraints

Toward Low-Cost, High-Efficiency, and Scalable Organic Solar Cells with Transparent Metal Electrode and Improved Domain Morphology