Abstract:Hydrogen storage method with high security, reliability and economy is the bottleneck of large-scale hydrogen utilization. Conventional techniques such as high-pressure gaseous storage (HPGS), liquid hydrogen storage (LHS), solid hydrogen storage (SHS, mainly dominated by metal hydrides based method) have their own disadvantages. For examples, HPGS needs so much high pressure that the security risk is created, even though the density is still unsatisfactory; LHS consumes so much power though it is the potential great way to achieve both high volume hydrogen storage density and mass hydrogen storage density; SHS needs lots of time and high temperature to storage/release, moreover practical application of metal hydrides is still not available. In this paper, a method by combining low-temperature and high-pressure technologies is proposed, which can achieve high density at not very low temperature and not very high pressure. The SRK equation is chose for describing the thermodynamic properties of hydrogen, since it agrees well with Refprop 9.1. Then the power consumption of compressors and fans in multistage hydrogen compression process is analyzed, showing that five stage compression is the best choice comprehensively considering the power consumption and the complexity of the compression. Meanwhile, the thermal load of hydrogen is analyzed in the cooling process from 300 to 20 K, revealing that the latent heat consumes about 54% of the total power consumption, though it only occupies 12% of the total thermal load. This is the essential reason why the proposed method is superior to LHS on power consumption. From the thermodynamic calculation we can conclude that: (1) Synthetically considering the hydrogen storage density and the total power consumption, the proposed method, that is gaseous low-temperature and high-pressure storage (GLTHPS), is better than HPGS and LHS; (2) there exists a maximum ψ (defined by hydrogen density divides total power consumption) at pressure above 10 MPa, and temperature below 120 K, meanwhile, the pressure increases with the temperature at the maximum ψ; (3) the recommended temperature and pressure parameters for hydrogen storage are (50 MPa, 100 K), (45 MPa, 100 K), (40 MPa, 90 K), (35 MPa, 80 K) and (30 MPa, 70 K), at which the density of hydrogen ranges from 62.3 to 65.3 kg/m3, and ψ ranges from 1.83 to 2.04. The optimized region for hydrogen storage is very practical, since both the mixed-refrigerants Joule Thomson refrigeration cycle (MJTR) and Reverse Brayton cycle (RBC) can achieve high efficiency at the temperature ranging from 150 to 70 K. The proposed method can well meet large-scale and low-cost requirement of hydrogen storage. Inevitably, the vessel used for low-temperature and high-pressure hydrogen storage must be specially designed, which is the biggest weakness of the proposed method. It will raise the initial cost, but decrease the operating cost significantly.

Thermodynamics analysis of hydrogen storage based on compressed gaseous hydrogen, liquid hydrogen and cryo-compressed hydrogen

Prediction of Dormancy Time of Cryo-Compressed Hydrogen Tank by Considering Dynamic Thermal Boundary

Thermodynamics Study of Hydrogen Storage Materials

The storage of hydrogen based on low-temperature and high-pressure method

Thermodynamic analysis of low-temperature and high-pressure (cryo-compressed) hydrogen storage processes cooled by mixed-refrigerants

DESIGN AND OPTIMIZATION OF HIGH-PRESSURE HYDROGEN CYLINDERS FOR INTERMODAL CONTAINER TRANSPORTATION

Perspective for the Safe and High-Efficiency Storage of Liquid Hydrogen: Thermal Behaviors and Insulation

The design and optimization of a cryogenic compressed hydrogen refueling process

Thermodynamic Analysis of the Effect of Initial Ortho-Hydrogen Concentration on Thermal Behaviors for Liquid Hydrogen Tanks

Techno-economic analysis on low-temperature and high-pressure cryo-adsorption hydrogen storage

Thermodynamic analysis of the para-to-ortho hydrogen conversion in cryo-compressed hydrogen vessels for automotive applications

Recent challenges and development of technical and technoeconomic aspects for hydrogen storage, insights at different scales; A state of art review

Thermodynamic modeling and analysis of hydrogen storage systems in hydrogen refueling stations

Study on Rare Earth Based Hydrogen Storage Alloy for High-pressure Metal Hydride Hydrogen Compressor

Investigation on High-Pressure Metal Hydride Hydrogen Compressors

Development of a gaseous and solid-state hybrid system for stationary hydrogen energy storage

Performances comparison of adsorption hydrogen storage tanks at a wide temperature and pressure zone

Liquid hydrogen, methylcyclohexane, and ammonia as potential hydrogen storage: Comparison review

Development of High Pressure Gaseous Hydrogen Storage Technologies

Design and optimization of cryogenic supercritical hydrogen storage system coupled with mixed refrigerant and gas expansion cycle

Technoeconomic Insights into Metal Hydrides for Stationary Hydrogen Storage