Abstract:The reaction between the hydroxyl groups on the surface of acid-treated multi-walled carbon nanotubes (MWNT) and 2-bromo-2-methylpropanoyl bromide generates ATRP initiator sites on the MWNT, and then fluorinated acrylates were polymerized from MWNT via a "graft-from" method. Fourier transform infrared spectrometry (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) results indicate that the polymer was covalently attached or grafted to the Surface of MWNT. Using MWNT coated with low surface energy polymer as the filler particles, a solution-casting method was employed to prepare MWNT/polyurethane composite films. The surface of composite films was exposed to tetrahydrofuran (THF) as the etchant to obtain the rough surface with microstructures. Static contact angle tests showed the hydrophobic properties of films were enhanced by adding the MWNT, and the contact angle was increased with the content of MWNT. The MWNT grafted with fluorinated polymers showed better hydrophobic performance than the pristine MWNT at the same content, and the film hydrophobicity was greatly improved after etching by solvent. Scanning electron microscopy (SEM) was used to study the microstructures of surfaces of composite films before and after etching. Effect of MWNT on the hydrophobic properties of the composite film surfaces was in-depth studied. Our experiments demonstrated that the hydrophobic properties of MWNT surfaces could be tuned via functionalization using different surface energy materials and the fabrication of polyurethane composite films with hydrophobic surfaces could be successfully achieved.

Development of MWCNTs@PDMS nanocomposites with enhanced hydrophobicity and thermo-oxidative stability

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Functionalized MWNT-Doped Thermoplastic Polyurethane Nanocomposites for Aerospace Coating Applications

Fluoro-polymer-coated carbon nanotubes for improved interfacial interactions and dielectric properties in MWCNTs/PVDF composites

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

Enhanced Dielectric, Electromechanical and Hydrophobic Behaviors of Core-Shell AgNWs@SiO2/PDMS Composites

Fluorinated Multi-Walled Carbon Nanotubes and Fabrication of Polyurethane Composite Films with Hydrophobic Surface

Effect of MWCNTs surface functionalization on the characterization of PVA/MWCNTs nanocomposites

Covalent Functionalization of Carbon Nanotubes with Polyhedral Oligomeric Silsequioxane for Superhydrophobicity and Flame Retardancy

An environmentally friendly strategy for preparing polydimethylsiloxane/multiwalled carbon nanotube composites with multilayer structures

The Role of Morphology on Thermal and Electrical Properties of MWCNT-Doped-PVDF Nanocomposites

Fabrication and properties of waterborne thermoplastic polyurethane nanocomposite enhanced by the POSS with low dielectric constants

Electrical Conduction and Dynamic Rheology of Multi-Walled Carbon Nanotubes and Hydrophobic Nanosilica-Filled Immiscible Poly(Methylmethacrylate)/Polystyrene Blends

Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes

Integration of PDA Chemistry and Surface‐Initiated ATRP to Prepare Poly(methyl Methacrylate)‐grafted Carbon Nanotubes and Its Effect on Poly(vinylidene Fluoride)–carbon Nanotube Composite Properties

A novel PVA/MWCNTs hydrogel with high toughness and electromagnetic shielding properties

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene