Abstract:The energy density of conventional Li-ion batteries (LIBs) has eventually reached their theoretical limit. Increasing worldwide efforts have been made towards the next generation of energy storage systems including batteries using Li metal anode in combination with various cathodes, including intercalation compounds (such as NMC) or conversion materials (such as oxygen (O2) and sulfur (S)). For a full demonstration of new battery chemistries, the interfacial stability is essential to long cycle lifespan and battery performance. In general, batteries suffer from “cross-talk” processes upon cycling by the crossover of parasitic chemicals through the electrolyte media [1]. Indeed, "cross-talk" phenomena in Li-ion batteries, such as Mn2+ crossover from the cathode and contaminate graphite anode has been well established [2]. Li-S and Li-O2 batteries also have the shuttle issues of soluble redox-active materials, polysulfides and superoxide radical anions, respectively. However, the similar characteristics in Li metal batteries (LMBs) with conventional Li ion intercalation cathodes have rarely been studied. Therefore, an in-depth understanding of how a Li metal anode affects the cathode interface chemistry is critical to ensure the long-term cycling stability of LMBs. Here, we report the cathode failure triggered by the chemical “cross-talk” between the electrode pair in rechargeable LMBs. In sharp contrast to LIBs, the cathode in LMBs suffers more significant and irreversible capacity fade during cycling, and its capacity cannot be fully recovered in spite of repeated replacement with new Li metal in the successive cycling. In-depth characterizations of the cathode surface reveal severe deterioration of cathode electrolyte interphase related to the significant accumulation of highly resistive polymeric components and lithium fluoride. Extensive salt-anion decomposition at Li metal surface can cause the chemical aging of the electrolyte allowing the migration of soluble byproducts toward the cathode side, resulting in the severe deterioration of cathode and separator surfaces. A selective Li-ion permeable separator with polydopamine coating has been developed to mitigate the detrimental chemical crossover and enhance the cathode stability. [1] Mikhaylik, Y. V.; Akridge, J. R., Polysulfide Shuttle Study in the Li/S Battery System. J. Electrochem. Soc. 2004, 151 (11), A1969-A1976 [2] Vetter, J.; Novák, P.; Wagner, M. R.; Veit, C.; Möller, K. C.; Besenhard, J. O.; Winter, M.; Wohlfahrt-Mehrens, M.; Vogler, C.; Hammouche, A. Ageing mechanisms in lithium-ion batteries. J. Power Sources 2005, 147 (1), 269-281. Figure 1

Crossover effects of transition metal ions in high-voltage lithium metal batteries

Detrimental Effects of Chemical Crossover from the Lithium Anode to Cathode in Rechargeable Lithium Metal Batteries

Crosstalk shielding of transition metal ions for long cycling lithium metal batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Detrimental Effects of Chemical Cross-Talk in Rechargeable Lithium Metal Batteries

Destructive effects of transitional metal ions on interfacial film of carbon anode for lithium-ion batteries

Enabling High-Voltage Lithium Metal Batteries under Practical Conditions

Enhanced high-voltage robustness of ultra-high nickel cathodes by constructing lithium-ion conductor buffer layer for highly stable lithium-ion batteries

Conductivity gradient modulator induced highly reversible Li anodes in carbonate electrolytes for high-voltage lithium-metal batteries

Deciphering Interphase Instability of Lithium Metal Batteries with Localized High-Concentration Electrolytes at Elevated Temperatures

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Research progress in failure mechanisms and electrolyte modification of high‐voltage nickel‐rich layered oxide‐based lithium metal batteries

A New Insight into Continuous Performance Decay Mechanism of Ni-rich Layered Oxide Cathode for High Energy Lithium Ion Batteries

Revealing the Conversion Mechanism of Transition Metal Oxide Electrodes During Lithiation from First-Principles

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Decoupling Capacity Fade and Voltage Decay of Li-rich Mn-rich Cathodes by Tailoring Surface Reconstruction Pathways

A medium-entropy transition metal oxide cathode for high-capacity lithium metal batteries

Unraveling the degradation mechanism of LiNi0.8Co0.1Mn0.1O2 at the high cut-off voltage for lithium ion batteries

Unveiling the Effect of Voltage Regulation System on the Structure and Electrochemical Properties of Lithium-Rich Cathode Materials