Abstract:Although traditional graphite anodes ensure the cycling stability and safety of lithium-ion batteries, the inherent drawbacks, particularly low theoretical specific capacity (372 mAh.g(-1)) and Li-free character, of such anodes limit their applications in high energy density battery systems, especially in lithium-sulfur and lithium-air batteries. Lithium metal has been considered as one of the best next-generation anode materials due to its extremely high theoretical specific capacity (3860 mAh.g(-1)) and low redox potential (-3.04 V vs. the standard hydrogen electrode). The first generation of commercial rechargeable lithium metal batteries were developed by Moli Energy in the late 1980s and were not widely used due to several problems, including low coulombic efficiency, poor cycle stability, and safety hazards. These problems associated with the Li metal anode are mainly caused by lithium dendrite growth, electrode volume changes, and interface instability. During the charge and discharge processes, Li deposition is not uniform across the electrode surface. Due to the low surface energy and high migration energy of Li metal, dendrites are preferentially formed during Li deposition. These dendrites proceed to grow with successive battery cycling, penetrate the separator, and eventually reach the cathode, thereby causing short circuits and thermal runaway. Additionally, the growth of the lithium dendrite is inherently correlated with the reaction interface structure, and dendrite growth results in inhomogeneity of the SEI (solid electrolyte interface) which is inevitably formed on the Li metal surfaces. Moreover, the volume change of lithium metal anodes is of importance, particularly during battery cycling and Li stripping/deposition processes which make the SEI layers considerably unstable. SEI layers usually cannot withstand the mechanical deformation caused by volume changes; such layers continuously break and repair during cycling and consume large amounts of the electrolyte. Additionally, some Li dendrites could break and become wrapped by SEI layers to form electrically isolated "dead" Li, which results in the loss of active Li in the Li metal anode. All these factors are responsible for the failure of Li metal anodes. Herein, recent investigations on the failure mechanisms of lithium metal anodes are reviewed and summarized, including the formation of SEI layers on the surface of Li metal anodes, the behavior and mechanism of lithium dendrite growth, and the mechanism of "dead" lithium formation. Additionally, some advanced characterization techniques for investigating lithium metal anodes are introduced, including in situ tools, cryoelectron microscopy, neutron depth analysis technology, and solid state nuclear magnetic resonance technology. These techniques enable researchers to gain in-depth insights into the failure mechanisms of Li metal anodes.

Detrimental Effects of Chemical Crossover from the Lithium Anode to Cathode in Rechargeable Lithium Metal Batteries

Detrimental Effects of Chemical Cross-Talk in Rechargeable Lithium Metal Batteries

Crossover effects of transition metal ions in high-voltage lithium metal batteries

Early Failure of Lithium–Sulfur Batteries at Practical Conditions: Crosstalk between Sulfur Cathode and Lithium Anode

Structural and Chemical Evolutions of Li/Electrolyte Interfaces in Li-Metal Batteries: Tracing Compositional Changes of Electrolytes under Practical Conditions

Crosstalk shielding of transition metal ions for long cycling lithium metal batteries

Life-cycle Evolution and Failure Mechanisms of Metal-Contaminant Defects in Lithium-Ion Batteries

The Influence of Cathode Degradation Products on the Anode Interface in Lithium-Ion Batteries

Cyclability Investigation of Anode-Free Lithium-Metal Batteries

Deciphering Interphase Instability of Lithium Metal Batteries with Localized High-Concentration Electrolytes at Elevated Temperatures

Evolution of Interfacial Phenomena Induced by Electrolyte Formulation and Hot Cycling of Anode-Free Li-Metal Batteries

Life Cycle Safety Issues of Lithium Metal Batteries: A Perspective

Suppressing Electrolyte-Lithium Metal Reactivity Via Li+-desolvation in Uniform Nano-Porous Separator

Failure Mechanisms of Lithium Metal Anode and Their Advanced Characterization Technologies

Behavior of Lithium Metal Anodes under Various Capacity Utilization and High Current Density in Lithium Metal Batteries

Decoupling Capacity Fade and Voltage Decay of Li-rich Mn-rich Cathodes by Tailoring Surface Reconstruction Pathways

Electrode Edge Effects and the Failure Mechanism of Lithium-Metal Batteries.

New Understanding toward Lithium Morphologic Evolution in Lithium Metal Batteries

Inhibiting Intercrystalline Reactions of Anode with Electrolytes for Long-Cycling Lithium Batteries

Influence of Carbonate Electrolyte Solvents on Voltage and Capacity Degradation in Li‐Rich Cathodes for Li‐ion Batteries

A Soft Non-Porous Separator and Its Effectiveness in Stabilizing Li Metal Anodes Cycling at 10 Ma Cm−2 Observed in Situ in a Capillary Cell