Abstract:A Li+/Na+ ion‐exchange reaction is reported to synthesize the Co‐free single‐crystalline Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO‐SC). In situ synchrotron‐based X‐ray diffraction and absorption spectroscopy are utilized to investigate the structural evolution of LLNMO‐SC and its polycrystalline counterpart (LLNMO‐PC) during electrochemical cycling. The origin of mitigated voltage decay in LLNMO‐SC is unraveled upon long‐term cycling. Lithium‐ and manganese‐rich layered oxides (LMLOs, ≥ 250 mAh g−1) with polycrystalline morphology always suffer from severe voltage decay upon cycling because of the anisotropic lattice strain and oxygen release induced chemo‐mechanical breakdown. Herein, a Co‐free single‐crystalline LMLO, that is, Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO‐SC), is prepared via a Li+/Na+ ion‐exchange reaction. In situ synchrotron‐based X‐ray diffraction (sXRD) results demonstrate that relatively small changes in lattice parameters and reduced average micro‐strain are observed in LLNMO‐SC compared to its polycrystalline counterpart (LLNMO‐PC) during the charge–discharge process. Specifically, the as‐synthesized LLNMO‐SC exhibits a unit cell volume change as low as 1.1% during electrochemical cycling. Such low strain characteristics ensure a stable framework for Li‐ion insertion/extraction, which considerably enhances the structural stability of LLNMO during long‐term cycling. Due to these peculiar benefits, the average discharge voltage of LLNMO‐SC decreases by only ≈0.2 V after 100 cycles at 28 mA g‐1 between 2.0 and 4.8 V, which is much lower than that of LLNMO‐PC (≈0.5 V). Such a single‐crystalline strategy offers a promising solution to constructing stable high‐energy lithium‐ion batteries (LIBs).

Unveiling the Effect of Voltage Regulation System on the Structure and Electrochemical Properties of Lithium-Rich Cathode Materials

Probing the Initiation of Voltage Decay in Li-rich Layered Cathode Materials at the Atomic Scale

Pre‐activation and Defects Introduced Via Citric Acid to Mitigate Capacity and Voltage Fading in Li‐rich Cathode

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration

Improving the Structural Stability of Li-rich Cathode Materials Via Reservation of Cations in the Li-slab for Li-ion Batteries

The Decay Mechanism Related to Structural and Morphological Evolution in Lithium‐Rich Cathode Materials for Lithium‐Ion Batteries

Decoupling the Voltage Hysteresis of Li‐Rich Cathodes: Electrochemical Monitoring, Modulation Anionic Redox Chemistry and Theoretical Verifying

Regulating the Potential of Anion Redox to Reduce the Voltage Hysteresis of Li-Rich Cathode Materials

Cut-off voltage influencing the voltage decay of single crystal lithium-rich manganese-based cathode materials in lithium-ion batteries

Influence of Carbonate Electrolyte Solvents on Voltage and Capacity Degradation in Li‐Rich Cathodes for Li‐ion Batteries

Voltage Decay in Layered Li-Rich Mn-Based Cathode Materials

Smart design of lithium-rich layered oxide cathode compositions with suppressed voltage decay

Improvement of the cyclic deterioration and structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 cathode material by controlling initial charging voltages

Relationship Between Voltage Hysteresis and Voltage Decay in Lithium-Rich Layered Oxide Cathodes

The Effects of Surface Polyanions on the Lithium-Excess Layered Cathode

Controllable oxygen vacancies (in surface and bulk) to suppress the voltage decay of Li-rich layered cathode

Addressing voltage decay in Li-rich cathodes by broadening the gap between metallic and anionic bands

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

Restriction of voltage decay by limiting low-voltage reduction in Li-rich oxide materials

Single-crystal Li-rich Layered Cathodes with Suppressed Voltage Decay by Double-Layer Interface Engineering

Structural Origin of Suppressed Voltage Decay in Single‐Crystalline Li‐Rich Layered Li[Li0.2Ni0.2Mn0.6]O2 Cathodes