CoFe2O4 nanocrystals for interface engineering to enhance performance of perovskite solar cells

Ruoshui Li,Yinsheng Liao,Yanfei Dou,Deng Wang,Guodong Li,Weihai Sun,Jihuai Wu,Zhang Lan

DOI: https://doi.org/10.1016/j.solener.2021.03.073

IF: 7.188

2021-05-01

Solar Energy

Abstract:Interface engineering has been widely applied to perovskite solar cells (PSCs) for solving the problems caused by high density of parasitic traps and the defects that exist at grain boundaries and surfaces. Various inorganic metal oxides play roles in PSCs, helping to achieve higher efficiency and better long-term stability. In this work, two-phase hydrothermal method is used for CoFe2O4 nanocrystals (NCs) synthesis and the obtained NCs were used to modify the surface between perovskite (PVK) and hole transport layer (HTL). Results show that CoFe2O4 modified devices have enhanced hole extraction, reduced trap density, and hydrophobic ligand connected to CoFe2O4 NCs provide better moisture resistance to PVK layer. Devices with CoFe2O4 layer exhibit a best PCE of 19.65% with improved open circuit voltage (VOC), fill factor (FF) and reproducibility. At steady-state, CoFe2O4 modified devices show a current density of 20.16 mA/cm2 and PCE of 18.97%.

energy & fuels

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the performance degradation and poor long - term stability in perovskite solar cells (PSCs) due to high - density parasitic traps and grain boundary and surface defects. The author conducts interface engineering by using cobalt ferrite nanocrystals (CoFe_2O_4 NCs) to improve the performance and stability of PSCs. Specifically, the research objectives are: 1. **Reduce defect density**: By introducing CoFe_2O_4 nanocrystals between the perovskite layer (PVK) and the hole - transport layer (HTL), the defect density on the surface and at the grain boundaries is reduced, thereby improving the optoelectronic performance of the device. 2. **Enhance hole - extraction ability**: CoFe_2O_4 nanocrystals can improve the extraction efficiency of holes from the perovskite layer to the HTL, reduce carrier recombination, and further increase the open - circuit voltage (VOC) and fill factor (FF) of the device. 3. **Improve humidity stability**: The hydrophobic ligands attached to the CoFe_2O_4 nanocrystals can provide better moisture - proof performance, protect the perovskite layer from moisture erosion, and thus improve the long - term stability of the device. 4. **Optimize device performance**: Determine the optimal concentration of CoFe_2O_4 nanocrystals through experiments to achieve the highest power conversion efficiency (PCE), and verify its stability and reproducibility in practical applications. The paper verifies the application effect of CoFe_2O_4 nanocrystals in PSCs through experiments. The results show that the devices modified by CoFe_2O_4 nanocrystals have a significant improvement in both performance and stability.

CoFe2O4 nanocrystals for interface engineering to enhance performance of perovskite solar cells

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Interface Modification with CuCrO 2 Nanocrystals for Highly Efficient and Stable Planar Perovskite Solar Cells

In Situ Interface Engineering with a Spiro‐OMeTAD/CoO Hierarchical Structure via One‐Step Spin‐Coating for Efficient and Stable Perovskite Solar Cells

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI3 Perovskite Solar Cells

Performance Improvement of Planar Perovskite Solar Cells with Cobalt-Doped Interface Layer

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Boosting Multiple Interfaces by Co-Doped Graphene Quantum Dots for High Efficiency and Durability Perovskite Solar Cells.

I/P Interface Modification for Stable and Efficient Perovskite Solar Cells

Bifunctional interface modification for efficient and UV-robust α-Fe2O3-based planar organic–inorganic hybrid perovskite solar cells

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Colloidal CsCu5S3 nanocrystals as an interlayer in high-performance perovskite solar cells with an efficiency of 22.29%

Recent Advances on Nanocrystals Embedding for High Performance Perovskite Solar Cells

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

Solution-Processed Fe2-Xmgxo3 Ternary Oxides for Interface Passivation in Efficient Perovskite Solar Cells

Surface Modification with CuFeS 2 Nanocrystals to Improve the Efficiency and Stability of Perovskite Solar Cells

Interfacial-engineering enhanced performance and stability of ZnO nanowire-based perovskite solar cells

A Core@Dual–Shell Nanostructured SnO2to Modulate the Buried Interfaces Toward Stable Perovskite Solar Cells with Minimized Energy Losses

Enhanced Efficiency and Stability of Carbon-Based CsPbI2Br Perovskite Solar Cells by Introducing Metal Organic Framework-Derived Fe3O4@NC Interfacial Layer

Highly efficient and stable perovskite solar cells enabled by a fluoro-functionalized TiO2 inorganic interlayer