Abstract:Defect ordered and low dimensional Cs 3 Bi 2 I 9 planar perovskites have garnered enormous significance in photovoltaic applications due to their remarkable stability against oxygen, heat, and moisture. Despite these advantages, the power conversion efficiencies of Cs 3 Bi 2 I 9 -based planar perovskites remain relatively low. This is primarily attributed to their wide band gap of approximately 2 eV and losses due to interfacial charge recombination. To resolve this issue, this article proposes a novel design of Cs 3 Bi 2 I 9 –La 2 NiMnO 6 based dual absorber composition to form a ITO/ETL/Cs 3 Bi 2 I 9 /La 2 NiMnO 6 (LNMO)/HTL multi-heterojunction perovskite solar cell (PSC) architecture. Incorporating La 2 NiMnO 6 oxide material as secondary multifunctional double perovskite absorber layer (DPAL), which possesses a lower band gap of 1.05 eV, as a secondary absorber layer enhances efficient charge separation. This material functions as a hole transport conductor, facilitating the creation of a cascade band-matched hole extraction system with the Cu 2 ZnSnS 4 (CFTS) hole transport material (HTM). Optimized optical response along with precisely aligned energy levels of the proposed Cs 3 Bi 2 I 9 –La 2 NiMnO 6 (LNMO) absorber composition greatly attributes in enhanced optical absorption with reduced recombination losses. The critical device parameters of the proposed PSC architecture have been intensively optimized through SCAPS-1D simulator to attain a substantially affordable power conversion efficiency (PCE) of 26.02%%, short circuit current ( J sc ) of 42.7 mA/cm 2 , open circuit voltage ( V oc ) of 0.863 V, and fill factor ( FF ) of 75.01% device defect density of 10 15 cm −3 under AM 1.5 photo illumination. Notably, the utilization of a dual-absorber structure comprising Cs 3 Bi 2 I 9 and La 2 NiMnO 6 materials proves to be significantly more efficient in terms of quantum efficiency and wide spectral coverage at optimal values compared to using either material alone as single absorbers. The proposed model achieves a peak efficiency of approximately 90.22% over a spectral range of 300–1200 nm, surpassing the efficiency of 80% attained with a single Cs 3 Bi 2 I 9 absorber covering a spectral range of 300–980 nm. Additionally, it outperforms the efficiency of 83% achieved by the single La 2 NiMnO 6 (LNMO) absorber within the spectral range of 300–1200 nm.

Photovoltaic energy conversion in multiferroic perovskite absorber-based devices via experiment and theoretical calculations

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

All oxide lead-free bismuth ferrite perovskite absorber based FTO/ZnO/BiFeO 3 /Au solar cell with efficiency ∼ 12%: First principle material and macroscopic device simulation studies

Exploration of the Photovoltaic Properties of Oxide-based Double Perovskite Bi2FeCrO6 using an amalgamation of DFT with Spin-Orbit Coupling Effect and SCAPS-1D Simulation Approaches

Efficient and stable perovskite solar cell through the interfacial engineering: Experiment and computational investigations

Improvement of photovoltaic response in perovskite solar cell via all inorganic lead free cubic double La2NiMnO6/Cs3Bi2I9 based graded absorber architecture

Effect of BaTiO3 powder as an additive in perovskite films on solar cells

First-principles calculation to investigate structural and opto-electronic properties of transition base halide perovskite oxides for solar cell applications

Numerical investigation of the Pb-free titanium-based double-perovskite solar cell

Fe3+ and Nb5+ substituted Na0.5Bi0.5TiO3: A route towards enhanced ferroelectric photovoltaic response in Al/NBFNT/Ag solar cell through reduced bandgap and controlled oxygen vacancy

Numerical Exploration of Lead-Free Inorganic Perovskite Cs2TiBr6 Solar Cell

Temperature Effect of the Compact Tio2 Layer in Planar Perovskite Solar Cells: an Interfacial Electrical, Optical and Carrier Mobility Study

Bandgap tuning of multiferroic oxide solar cells

Structural modification and analysis of novel inverted perovskite photo-voltaic device by incorporating atomic layer deposition and surface passivation

Investigating the Performance of Lead-Free Perovskite Solar Cells Using Various Hole Transport Material by Numerical Simulation

Maximizing Short Circuit Current Density and Open Circuit Voltage in Oxygen Vacancy-Controlled Bi1- xCaxFe1- yTiyO3-δ Thin-Film Solar Cells

Investigating the potential of lead‐free double perovskite Cs2AgBiBr6 material for solar cell applications: A theoretical study

Enhancing power conversion efficiency of lead-free perovskite solar cells: a numerical simulation approach

Nitrogen-Doped Titanium Dioxide as a Hole Transport Layer for High-Efficiency Formamidinium Perovskite Solar Cells

Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells

Enhanced Electronic Transport in Fe3+-doped TiO2 for High Efficiency Perovskite Solar Cells