Abstract:Conventional lead halide Perovskite Solar Cells (PSC) have toxicity and stability issues. Therefore it is crucial to look for lead-free inorganic perovskite material, such as La 2 NiMnO 6 , RbGeI 3 , CsGeI 3 , Cs 2 AgBiBr 6 and others. There has been much work in the area of PSC using Cs 2 AgBiBr 6 as an absorber, However, due to some critical issues of Cs 2 AgBiBr 6 , such as the film's broad bandgap which limits its capacity to absorb light, leading to corresponding PSC being typically restricted to around 4% efficiency. In this work, a lead-free PSC with Cs 2 AgBiBr 6 as the absorber has been engineered to resolve the issues by considering the experimental works in the literature to increase efficiency to 6.3% from a maximum 4.48% as reported in the literature. The output response of both design approaches, as well as the potentiality of future designs, are investigated in terms of output parameters, i.e., Open-Circuit Voltage (V OC ), Short-circuit Current density (J SC ), Fill Factor (FF), and Power Conversion Efficiency (PCE). Besides, this work also focuses on eliminating Sulphur from ETLs by working on several sulphides and oxide-based Electron Transport Layers (ETLs). Several solar cell device structures have been analyzed for their numerical simulation with sulphide ETLs such as ZnS, WS 2 , CdS, CdZnS and oxide ETLs such as TiO 2 , ZnO, WO 3 , IGZO. To progress towards eco-friendly PSCs, alternatives to sulphide, several transparent oxide alternatives (TiO 2 , ZnO, WO 3 , IGZO) have been considered as ETLs. These ETLs have been further doped with Mg to enhance the performance parameters. Mg-doped based ETLs additionally behaving as Hole-blocking layers (HBLs) in corresponding PSCs leads to comparatively significantly better performance in a number of aspects, including V OC (1.21 V), PCE (5.74%), J SC , and FF. The solar cell design has been optimized for high performance through various techniques such as varying ETL and absorber thickness, interface defects variation, series/shunt resistance, band to band recombination, and bandgap grading through doping. Also an effective electric field (E eff ) that depicts the conduction's impact has been calculated. Best performing device among different designs among PSCs with sulphide and oxide-based ETLs has been ZnS/Cs 2 AgBiBr 6 /Cu 2 O (PCE-6.3%) and Mg-doped (20%) ZnO/Cs 2 AgBiBr 6 /Cu 2 O (PCE-5.74%). These results may help researchers in their efforts to find the best-suited materials for the design of high-performance PSCs in the future.

Efficient and stable perovskite solar cell through the interfacial engineering: Experiment and computational investigations

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Improvement of photovoltaic response in perovskite solar cell via all inorganic lead free cubic double La2NiMnO6/Cs3Bi2I9 based graded absorber architecture

Lead free efficient perovskite solar cell device Optimization and defect study using Mg doped CuCrO2 as HTL and WO3 as ETL

Exploration of the Photovoltaic Properties of Oxide-based Double Perovskite Bi2FeCrO6 using an amalgamation of DFT with Spin-Orbit Coupling Effect and SCAPS-1D Simulation Approaches

Self‐Organized Co 3 O 4 ‐SrCO 3 Percolative Composites Enabling Nanosized Hole Transport Pathways for Perovskite Solar Cells

High‐Efficiency and Stable Perovskite Solar Cells via Buried Interface Modification with Multi‐Functional Phosphorylcholine Chloride

Revealing the High-Performance of a Novel Ge-Sn-Based Perovskite Solar Cell by Employing SCAPS-1D

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Selection of a compatible electron transport layer and hole transport layer for the mixed perovskite FA0.85Cs0.15Pb (I0.85Br0.15)3, towards achieving novel structure and high-efficiency perovskite solar cells: a detailed numerical study by SCAPS-1D

Device engineering of double perovskite based solar cells towards high-performance, eco-friendly solar cells

Enhancing CsSn0.5Ge0.5I3 Perovskite Solar Cell Performance via Cu2O Hole Transport Layer Integration

Advancing stability and efficiency in perovskite solar cells: A novel approach using mixed cations based absorber layer

Improving the perovskite solar cell by insertion of methyl ammonium tin oxide and cesium tin chloride as absorber layers: scaps 1d study based on experimental studies

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Design and optimization of high-performance eco-friendly perovskite solar cells: Utilizing FAMASnGeI3 and CsGeI3 as absorbers and tuning HTL and interface parameters

Investigating the theoretical performance of Cs$_2$TiBr$_6$-based perovskite solar cell with La-doped BaSnO$_3$ and CuSbS$_2$ as the charge transport layers

A Core@Dual–Shell Nanostructured SnO2 to Modulate the Buried Interfaces Toward Stable Perovskite Solar Cells With Minimized Energy Losses

Enhancing the efficiency of the organic-inorganic hybrid perovskite cells using Al-doped ZnO as an Electron Transport Layer and CNTs as a Hole Transport Layer: An experimental and numerical study

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

Efficient and stable perovskite solar cells by interface engineering at the interface of electron transport layer/perovskite