Abstract:Despite the rapid progress that has been made in increasing the power conversion efficiency (PCE) of organic solar cells (OSCs) over the past decade, it is a challenge to realize efficient and environment-friendly OSCs. In this contribution, all polymer solar cells were fabricated with a blend of poly[4,8-bis(5-(2-ethylhexyl) thiophen-2-yl) benzo[1,2-b: 4,5-b'] dithiophene-co-3-fluorothieno[3,4-b] thiophene-2-carboxylate] (PTB7Th) donor and vinylene-bridged perylenediimide-based polymer (PDI-V) acceptor, in which non-halogenated tetrahydrofuran (THF) was used as the host solvent. A conventional device structure of ITO/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)/PTB7-Th:PDI-V/zirconium acetylacetonate (ZrAcac)/Al was employed, where PEDOT:PSS functioned as the hole transporting layer (HTL) and ZrAcac functioned as the electron transporting layer (ETL). The mixed solution of PTB7-Th and PDI-V was spin cast on the top of PEDOT:PSS layer to form the active layer. After that, ZrAcac solution was spin cast on the top of PTB7-Th:PDI-V layer. Different thermal annealing temperatures were used to optimize the active layer morphology. In details, OSCs without thermal annealing showed a PCE of 7.1%, with a short-circuit current (J(SC)) of 14.9 mA/cm(2), an open-circuit voltage (V-OC) of 0.74 V, and a fill factor (FF) of 64%. The devices annealed at 120 degrees C showed a high PCE of 8.1% with a J(SC) of 15.5 mA/cm(2), a V-OC of 0.74 V, and a FF of 70%. Further increasing the annealing temperature to 150 degrees C led to decreased FF and thereby a relatively lower PCE (7.4%). To the best of our knowledge, the PCE of similar to 8.1% is one of the highest PCE values reported in the literature so far for all polymer solar cells. The high and balanced hole and electron mobility partially contributed to such a high performance. These results suggest that THF as good non-halogenated solvent can be used to fabricate high-performance all polymer solar cells. Higher efficiency can be achieved for OSCs with THF solvent when better polymer acceptors are employed.

High-efficiency organic photovoltaic cells processed using a non-halogen solvent

Volatile Solid‐Assisted Molecular Assembly Enables Eco‐Friendly Processed Organic Photovoltaic Cells with High Efficiency and Photostability

Recent advances in non-fullerene organic photovoltaics enabled by green solvent processing

Optimizing the solvent and blend morphology results in an additive-free organic photovoltaic achieving 17.8% efficiency

Efficient Ternary Organic Photovoltaic Device with Non-halogen Solvent via Synergistic Inhibiting Charge Recombination and Regulating Morphology

Eco‐Compatible Solvent‐Processed Organic Photovoltaic Cells with Over 16% Efficiency

Highly Efficient Perovskite Solar Cells Fabricated by Simplified One-Step Deposition Method with Non-Halogenated Anti-Solvents

Non-halogenated Solvents for Environmentally Friendly Processing of High-Performance Bulk-Heterojunction Polymer Solar Cells

Progress in organic photovoltaics based on green solvents: from solubility enhancement to morphology optimization

Asymmetric Alkyl Chain Engineering for Efficient and Eco‐Friendly Organic Photovoltaic Cells

High-Efficiency Organic Solar Cells Processed from Real Green Solvent

A Universal Nonhalogenated Polymer Donor for High‐Performance Organic Photovoltaic Cells

Green‐Solvent‐Processed Organic Solar Cells with Approaching 20% Efficiency and Improved Photostability

Efficient organic solar cells processed from hydrocarbon solvents

Spontaneous Vertical Phase Distribution of Multi-Acceptors System Enables High-Efficiency Organic Photovoltaics in Non-Halogenated Solvent and Large-Area Module Application

High‐Performance Organic Solar Cells from Non‐Halogenated Solvents

Achieving 12.6% Efficiency in Single‐Component Organic Solar Cells Processed from Nonhalogenated Solvents

Solution-processed perovskite solar cells using environmentally friendly solvent system

Nonhalogenated Photoactive Layer PBDB‐T:BTP‐M‐Based Organic Solar Cells with Efficient and Stable Performance

High-performance All Polymer Solar Cells Fabricated with Non-halogenated Solvent

Critical Role of Non-Halogenated Solvent Additives in Eco-Friendly and Efficient All-Polymer Solar Cells