Abstract:A new non‐halogenated solvent additive, 9‐fluorenone (9‐FL), is utilized to effectively optimize the morphology of the photoactive layer, mainly due to the enhanced thermal‐assisted molecular reorganization upon volatilization of the additive. Consequently, efficient and symmetric charge transport and suppressed photo‐induced trap generation are obtained, resulting in halogen‐free solvent‐processed organic photovoltaic cells with remarkably high efficiencies and significantly extended lifetime. Achieving environmentally friendly solvent‐processed high‐performance organic photovoltaic cells (OPVs) is a crucial step toward their commercialization. Currently, OPVs with competitive efficiencies rely heavily on harmful halogenated solvent additives. Herein, the green and low‐cost 9‐fluorenone (9‐FL) is employed as a solid additive. By using the o‐xylene/9‐FL solvent system, the PM6:BTP‐eC9‐based devices deliver power‐conversion efficiencies of 18.6% and 17.9% via spin‐coating and blade‐coating respectively, outperforming all PM6:Y‐series binary devices with green solvents. It is found that the addition of 9‐FL can regulate the molecular assembly of both PM6 and BTP‐eC9 in film‐formation (molecule‐level mixing) and post‐annealing (thermal‐assisted molecular reorganization with additive volatilization) stages, so as to optimize the blend morphology. As a result, the charge transport ability of donor and acceptor phases are simultaneously enhanced, and the trap‐assisted recombination is reduced, which contributes to the higher short‐circuit current density and fill factor. Moreover, the generation of photo‐induced traps is significantly suppressed, resulting in improved stability under illumination. It is further demonstrated the excellent universality of 9‐FL in various photoactive systems, making it a promising strategy to advance the development of eco‐friendly OPVs.

Optimizing the solvent and blend morphology results in an additive-free organic photovoltaic achieving 17.8% efficiency

Improving Photovoltaic Performance of Non‐Fullerene Polymer Solar Cells Enables by Fine‐Tuning Blend Microstructure via Binary Solvent Mixtures

High-efficiency organic photovoltaic cells processed using a non-halogen solvent

Air‐Processed Efficient Organic Solar Cells from Aromatic Hydrocarbon Solvent without Solvent Additive or Post‐Treatment: Insights into Solvent Effect on Morphology

Revealing the underlying solvent effect on film morphology in high-efficiency organic solar cells through combined ex situ and in situ observations

Volatile Solid‐Assisted Molecular Assembly Enables Eco‐Friendly Processed Organic Photovoltaic Cells with High Efficiency and Photostability

Improved Blend Film Morphology and Free Carrier Generation Provide a High-Performance Ternary Polymer Solar Cell

Synergistic Effects of Solid and Solvent Additives on Film Morphology Enable Binary Organic Solar Cells with Efficiency of Over 19%

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Equally high efficiencies of organic solar cells processed from different solvents reveal key factors for morphology control

Processing Strategies for an Organic Photovoltaic Module with over 10% Efficiency

Boosting Highly Efficient Hydrocarbon Solvent-Processed All-Polymer-Based Organic Solar Cells by Modulating Thin-Film Morphology

Over 17.6% Efficiency Organic Photovoltaic Devices with Two Compatible Polymer Donors

Efficient Ternary Organic Photovoltaic Device with Non-halogen Solvent via Synergistic Inhibiting Charge Recombination and Regulating Morphology

Improved Charge Transport and Reduced Carrier Recombination of Nonfullerene Organic Solar Cells with the Binary Solvent

Mixed Solvent as a Critical Factor in Optimizing Phase Separation of All Small Molecule Organic Solar Cells

Morphology Optimization via Pre-aggregation and Miscibility Matching in PM6:L8-BO Ternary Organic Solar Cells

All green solvent and additive combination enables efficient non‐fullerene organic solar cells via sequentiao deposition strategy

Simultaneously Optimizing Molecular Stacking and Phase Separation via Solvent‐Solid Hybrid Additives Enables Organic Solar Cells with over 19% Efficiency

Spontaneous Vertical Phase Distribution of Multi-Acceptors System Enables High-Efficiency Organic Photovoltaics in Non-Halogenated Solvent and Large-Area Module Application

Pathways to Upscaling Highly Efficient Organic Solar Cells Using Green Solvents: A Study on Device Photophysics in the Transition from Lab‐to‐Fab