Abstract:Despite the rapid progress that has been made in increasing the power conversion efficiency (PCE) of organic solar cells (OSCs) over the past decade, it is a challenge to realize efficient and environment-friendly OSCs. In this contribution, all polymer solar cells were fabricated with a blend of poly[4,8-bis(5-(2-ethylhexyl) thiophen-2-yl) benzo[1,2-b: 4,5-b'] dithiophene-co-3-fluorothieno[3,4-b] thiophene-2-carboxylate] (PTB7Th) donor and vinylene-bridged perylenediimide-based polymer (PDI-V) acceptor, in which non-halogenated tetrahydrofuran (THF) was used as the host solvent. A conventional device structure of ITO/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)/PTB7-Th:PDI-V/zirconium acetylacetonate (ZrAcac)/Al was employed, where PEDOT:PSS functioned as the hole transporting layer (HTL) and ZrAcac functioned as the electron transporting layer (ETL). The mixed solution of PTB7-Th and PDI-V was spin cast on the top of PEDOT:PSS layer to form the active layer. After that, ZrAcac solution was spin cast on the top of PTB7-Th:PDI-V layer. Different thermal annealing temperatures were used to optimize the active layer morphology. In details, OSCs without thermal annealing showed a PCE of 7.1%, with a short-circuit current (J(SC)) of 14.9 mA/cm(2), an open-circuit voltage (V-OC) of 0.74 V, and a fill factor (FF) of 64%. The devices annealed at 120 degrees C showed a high PCE of 8.1% with a J(SC) of 15.5 mA/cm(2), a V-OC of 0.74 V, and a FF of 70%. Further increasing the annealing temperature to 150 degrees C led to decreased FF and thereby a relatively lower PCE (7.4%). To the best of our knowledge, the PCE of similar to 8.1% is one of the highest PCE values reported in the literature so far for all polymer solar cells. The high and balanced hole and electron mobility partially contributed to such a high performance. These results suggest that THF as good non-halogenated solvent can be used to fabricate high-performance all polymer solar cells. Higher efficiency can be achieved for OSCs with THF solvent when better polymer acceptors are employed.

Highly Efficient Perovskite Solar Cells Fabricated by Simplified One-Step Deposition Method with Non-Halogenated Anti-Solvents

Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells

Achieving 12.6% Efficiency in Single‐Component Organic Solar Cells Processed from Nonhalogenated Solvents

Solution-processed perovskite solar cells using environmentally friendly solvent system

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

High-efficiency Organic Solar Cells Processed from a Halogen-Free Solvent System

Systematic optimization of perovskite solar cells via green solvent systems

High-performance All Polymer Solar Cells Fabricated with Non-halogenated Solvent

Non-halogenated Solvents for Environmentally Friendly Processing of High-Performance Bulk-Heterojunction Polymer Solar Cells

Non-halogenated solvent-processed single-junction polymer solar cells with 9.91% efficiency and improved photostability

Highly Efficient All‐Polymer Solar Cells Processed from Nonhalogenated Solvents

A facile strategy for highly efficient perovskite crystals fabricated in a high moisture environment via solvent engineering process

Green–Solvent–Processable Perovskite Solar Cells

All Green Solvent Engineering of Organic-Inorganic Hybrid Perovskite Layer for High-Performance Solar Cells

High-efficiency organic photovoltaic cells processed using a non-halogen solvent

Green Solvents Processed All Functional Layers for Efficient Perovskite Solar Cells

Highly Efficient Perovskite Solar Cells Using Non-Toxic Industry Compatible Solvent System

Polymer Solar Cells Spray Coated with Non-Halogenated Solvents

Greener and Easily Available Solvent Assisted Preparation of High Efficiency Perovskite Solar Cells

Volatile Dual-Solvent Assisted Intermediate Phase Regulation for Anti-Solvent-Free Perovskite Photovoltaics.

Solvent engineering of SnO2 electron transport layer for high-performance perovskite solar cells