Abstract:In this research, the earing characteristics of 6K21 aluminum alloy in circular cup deep drawing are investigated by virtue of experiments and multi-scale simulations including anisotropic Drucker, Hill48, Yld91 yield functions and crystal plastic finite element model (CPFEM). First, the deep drawing experiments of AA 6K21 are carried out to explore the influences of blank holding force (BHF) and blank diameter (BD) on earing profile and mechanical response. The user-defined material model subroutine is written for LS-DYNA explicit code, including constitutive model and ductile fracture criterion under associated or non-associated flow rule (NAFR). The parameters of the crystal plasticity model are calibrated by means of an optimization algorithm. Three yield functions under NAFR and CPFEM are used to predict earing in deep drawing simulation. The effects of five textures on the earing profiles and thickness variables are studied by CPFEM. The results demonstrate that the earing rate decreases slightly as the BHF increases. However, the mechanical response changes insignificantly. Moreover, as the BD increases, both the earing rate and mechanical response increase significantly. Considering computation accuracy and efficiency, the anisotropic Drucker function can accurately character the plastic deformation behavior of deep drawing. For five textures in CPFEM, Cube and Goss textures produce four ears at 0o and 90o from the rolling direction. Brass and S textures form six ears at 0o and 55o . Copper texture fabricates eight ears at 40o and 70o . The influences of five textures on earing rate are Goss > Cube > Copper > Brass > S. Furthermore, there are obvious thickness gradient fluctuations at the corner of the cup in Cube, Goss and Copper textures. It is expected to reduce the earing rate and improve the formability through reasonable allocations of experimental parameters and texture proportions.

Improving parameters for achieving uniform cylindrical cup wall thickness in two-step deep drawing processes with SPCC sheet material

Study on Deep drawing Forming Process of Wheel Disks

Research on 5A06 Aluminium Alloy Thin-wall Semisphere Hydromechanical Deep Drawing Process

Finite Element Simulation of a Multistage Square Cup Drawing Process for Relatively Thin Sheet Metal through a Conical Die

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups

An Innovative Deep Drawing Process of Thin Curved Shells with Positive Local Bulging

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Detailed experimental and numerical analysis of a cylindrical cup deep drawing: pros and cons of using solid-shell elements

Study on Micro Deep Drawing Process and Die Design

Application of multi draw radius deep draw die for increase in formability of redrawn cylindrical cups

Research on compound forming process of cup-shaped part with inner gear

Electromagnetic pulse-assisted incremental drawing of aluminum cylindrical cup

Enhancing formability in deep drawing: A 3D finite element analysis of plastic wrinkling in AA2090 Al–Li alloy

Forming Limit of Sheet Metal in Cylindrical Deep Drawing with a Conical Die

Experimental and numerical optimization of deep drawing process parameters for square medical container design with the Taguchi method

A Study on Yield Criteria Influence on Anisotropic Behavior and Fracture Prediction in Deep Drawing SECC Steel Cylindrical Cups

The Study on Forming Principle in the Process of Hydro-Mechanical Reverse Deep Drawing with Axial Pushing Force for Cylindrical Cups

Plastic Deformation Mechanism in Double-Roller Clamping Spinning of Flanged Thin-Walled Cylinder

Hybrid models for optimization of deep-drawn cups deploying scaling laws: a case study for sustainable development

Multi-scale numerical investigation of deep drawing of 6K21 aluminum alloy by crystal plasticity and a stress-invariant based anisotropic yield function under non-associated flow rule

Numerical Analysis Of Formability Of Stepped Cup In Non-Isothermal Deep Drawing Of Aluminum Alloy Sheet