Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Effective disproportionation of SiO induced by Na2CO3 and improved cycling stability via PDA-based carbon coating as anode materials for Li-ion batteries

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

Boosting Cyclability and Rate Capability of SiOx Via Dopamine Polymerization-Assisted Hybrid Graphene Coating for Advanced Lithium-Ion Batteries.

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Sequencing-Dependent Impact of Carbon Coating on Microstructure Evolution and Electrochemical Performance of Pre-lithiated SiO Anodes: Enhanced Efficiency and Stability via Pre-Coating Strategy

Sn Alloy and Graphite Addition to Enhance Initial Coulombic Efficiency and Cycling Stability of SiO Anodes for Li‐Ion Batteries

Boosting Cyclability and Rate Capability of SiO x via Dopamine Polymerization-Assisted Hybrid Graphene Coating for Advanced Lithium-Ion Batteries

High Initial Coulombic Efficiency of SiO Enabled by Controlling SiO2 Matrix Crystallization

Mg 2 SiO 4 /Si-Coated Disproportionated SiO Composite Anodes with High Initial Coulombic Efficiency for Lithium Ion Batteries

Nitrogen-Doped Carbon-Coating Disproportionated SiO Materials As Long Cycling Stable Anode for Lithium Ion Batteries

Potassium Ions Regulated the Disproportionation of Silicon Monoxide Boosting Its Performance for Lithium-Ion Battery Anodes

Modifying SiO @ C As High-performance Anode of Lithium-ion Batteries

Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage.

High-performance SiO/C Anode Material in Li-ion Battery by Pre-disproportionation Treatment

Highly Graphitized Carbon Coating on SiO with a π–π Stacking Precursor Polymer for High Performance Lithium-Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Stable operation of SiO anodes enabled by a multifunctional molecular crosslinker

Improved electrochemical performance of silicon monoxide anode materials prompted by macroporous carbon

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

Mg‐doped, carbon‐coated, and prelithiated SiOx as anode materials with improved initial Coulombic efficiency for lithium‐ion batteries