Abstract:Silicon-flexible carbon composites can achieve binder-free application and solve the problem of silicon expansion during cycles. The effective loading and dispersion of silicon onto carbon play an important role in improving the performance of anode materials. Herein, surface engineering of the hole-opening process was successfully achieved before the deposition of silicon. This resulted in fine holes on the carbon cloth, increasing the specific surface area to provide abundant confined spaces for dispersing nano-silicon. A composite structure was formed and structurally optimized by depositing an ultra-thin silicon layer in the holes of mesoporous carbon fiber cloth (DTSi/CC), improving the conductivity of the material, increasing the migration rate of lithium ions, and inhibiting the volume expansion of the anode material during the cycles. At 100 mA g–1, the fabricated half-cells achieved a reversible capacity of 1457 mA h g–1 and retained 70.9% initial capacity after 100 cycles. Even when the current density was increased to 1.0 A g–1, they boasted a capacity of 1037 mA h g–1 and had 76.8% capacity retention after 500 cycles. Free of binders and conductive additives, the DTSi/CC composite was directly used as the anode, exhibiting superior properties with high reversible specific capacity, excellent cyclic performance, and good rate capability. This study provides a straightforward, effective route to obtain high-performance silicon-based anode materials for lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c01049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c01049</a>.Material characterization; measurement of the electrochemical properties; SEM images during synthesis; full XPS spectra; and electrochemical performance of cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c01049/suppl_file/ae1c01049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Incorporation of lithium oxide into silicon anode via magnetron co-sputtering to optimize structural stability and cycling performance

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

Synthesis and Surface Engineering of Composite Anodes by Coating Thin-Layer Silicon on Carbon Cloth for Lithium Storage with High Stability and Performance

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix

Enhancing Delithiation Reversibility of Li15Si4 Alloy of Silicon Nanoparticles-Carbon/Graphite Anode Materials for Stable-Cycling Lithium Ion Batteries by Restricting the Silicon Particle Size

Atomic/Molecular Layer-Deposited Laminated Li2O-Lithicone Interfaces Enabling High-Performance Silicon Anodes.

The facile preparation and performances of prelithiated silicon oxide anode materials

Cu 3 Si-Modified Silicon Nanoparticles Encapsulated within SiO x and Hollow Carbon for Lithium-Ion Battery Anodes

Facile Fabrication of Oxide Layer for Si Anode with Enhanced Lithium Storage Performances Via Plasma Oxidation

Enhanced Cycleability of Micron‐Size Silicon Anode by In Situ Polymerized Polymer Electrolyte

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

In Situ Growth of Silicon Carbide Interface Enhances the Long Life and High Power of the Mulberry-Like Si-based Anode for Lithium-Ion Batteries

Improving the lithium storage performance of micro-sized SiO particles by uniform carbon interphase encapsulation and suitable SiO2 buffer component

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries