Abstract:Redox flow batteries based on sodium polysulfide (Na 2 Sx) show promise due to sodium's high solubility in organic solvents (e.g., diglyme. However, when x is lower than 5, sodium polysulfide exhibits low solubility (less than 0.1 molal), limiting the nominal capacity of this redox-active material. Sodium phosphorothioate complexes, Na 2 P 2 Sx, have been reported as an alternative to Na2Sx. Incorporating phosphorus into the polysulfide structure improves their solubility in organic solvents, specifically in diglyme. This presentation will describe the synthesis and characterization of sodium phosphorothioate complexes (Na 2 P 2 S x , where x = 6, 7, 8, and 9) for nonaqueous redox flow batteries. The structure of these materials is explored using 31 P NMR and 23 Na NMR spectroscopy, Raman spectroscopy, and X-ray diffraction analysis. Overall, 31 P NMR results indicate that P 5+ is tetrahedrally coordinated in all structures and that Na-P-S compounds have a common PS 3 - moiety. Ongoing efforts are aimed at providing more precise assignments to the 31 P bands and correlating these findings with complementary structural information obtained from 23 Na NMR and Raman spectroscopy. Electrochemical properties of sodium polysulfide and sodium thiophosphate catholytes, specifically Na 2 S 8 and Na 2 P 2 S 8 , were also compared using CV. The voltammogram of Na 2 S 8 revealed two clear redox reactions in the 1.5-3 V range vs. Na/Na + due to a multi-step electron transfer process involving the S 2- /S 0 redox center. In contrast, Na 2 P 2 S 8 exhibited a larger peak separation (~2 V) and lower peak currents at a given scan rate, potentially indicating a significant activation barrier associated with the rearrangement of the thiophosphate’s polyanionic structure during reduction/oxidation. Despite the substantial voltage hysteresis, Na 2 P 2 S 8 displayed stable cycling performance, with a slight increase in peak current after 100 cycles. This behavior is consistent with measurements on RFBs containing a Na 2 P 2 S x catholyte, where an electrode activation process increased the cell’s reversible capacity, likely due to subtle changes in the electrode’s surface chemistry during repeated oxidation/reduction. Finally, preliminary flow cell measurements on Na 2 P 2 S 7 catholyte show reversible voltage profiles after the formation step with deep discharge. Overall, this presentation demonstrates that Na-P-S catholytes represent a promising material for high energy, low-cost redox flow batteries. Acknowledgements This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and is sponsored by the U.S. Department of Energy through the Energy Storage Program in the Office of Electricity.

Successive ionic layer adsorption and reaction–deposited copper sulfide electrocatalyst for high-power polysulfide-based aqueous flow batteries

Aqueous Polysulfide-Based Redox Flow Battery with Soluble Molecular Catalysts

Polysulfide-based redox flow batteries with long life and low levelized cost enabled by charge-reinforced ion-selective membranes

Hierarchical Nano-Electrocatalytic Reactor for High Performance Polysulfides Redox Flow Batteries

High-efficient multifunctional electrochemical membrane for lithium polysulfide redox flow batteries

A neutral polysulfide/ferricyanide redox flow battery

Thiosulfate‐Mediated Polysulfide Redox for Energetic Aqueous Battery

High-Capacity CuSi2P3-Based Semisolid Anolyte for Redox Flow Batteries.

Regulating the polysulfide redox kinetics for high-performance lithium-sulfur batteries through highly sulfiphilic FeWO4 nanorods

Polysulfide Electrocatalysis on Framework Porphyrin in High-Capacity and High-Stable Lithium–Sulfur Batteries

Visualized redox reaction guides polysulfide synthesis with electrochemical approach for long-cycle lithium-sulfur batteries

A Stable and Energy-Dense Polysulfide/Permanganate Flow Battery

Improved Formulation and Optimization of Sodium Polysulfide/Bromine Electrolytes for Redox Flow Battery

Electrochemical Stability and Reversibility of Aqueous Polysulfide Electrodes Cycled Beyond the Solubility Limit

Sodium Polysulfides As Catholytes for Redox Flow Batteries

Fence-type Molecular Electrocatalysts for High-Performance Lithium-Sulfur Batteries

Boosted polysulfides regulation by iron carbide nanoparticles-embedded porous biomass-derived carbon toward superior lithium–sulfur batteries

High-Capacity CuSi 2 P 3 -Based Semisolid Anolyte for Redox Flow Batteries

Rational design of bidirectional electrocatalysts and accelerated sulfur redox reactions in lithium-sulfur batteries

A High‐Efficiency CoSe Electrocatalyst with Hierarchical Porous Polyhedron Nanoarchitecture for Accelerating Polysulfides Conversion in Li–S Batteries

A High‐Efficiency Mo 2 C Electrocatalyst Promoting the Polysulfide Redox Kinetics for Na–S Batteries