Abstract:Partial hydrogenation of soybean oil-derived fatty acid methyl esters was studied using MCM-41 mesoporous silica-supported Pd-Pt bimetallic catalysts with tunable porosity under mild reaction conditions (100 °C, 0.4 MPa H2, 4 h). This process produced partially hydrogenated fatty acid methyl esters (H-FAME) as a new type of high-quality biodiesel fuel enriched in monounsaturated fatty acid methyl esters (mono-FAME), which is a potential source for formulating high blends of biodiesel fuel with petrodiesel. MCM-41 supports with various structural properties and morphologies were synthesized by self-assembly with different amounts of ammonia solution as a mineralizing agent. Bimetallic Pd-Pt nanoparticles with a Pd/Pt atomic ratio of 4 were stepwise impregnated on three MCM-41 supports, resulting in a series of Pd-Pt/MCM-41 bimetallic catalysts with tunable porosity (0.89–1.79 cm3 g−1), average pore size (3.2–8.5 nm), and particle size (0.12–0.62 μm). The Pd-Pt/MCM-41 catalyst prepared with the least amount of ammonia produced the best partial hydrogenation conversion of polyunsaturated FAME into mono-FAME, ascribed to nano-aggregation resulting in a dual-pore system containing large pores for fast molecular diffusion; a high turnover frequency (1920 h−1), larger k1 rate constant (0.60 gcat−1h−1), and smaller k2 rate constant (0.37 gcat−1h−1) were obtained. Furthermore, this Pd-Pt/MCM-41 catalyst exhibited excellent sulfur resistance in the synthesis of H-FAME, even though the feedstocks contained approximately 5 ppm of sulfur contaminates. These results demonstrate that the sulfur-resistant Pd-Pt/MCM-41 bimetallic catalysts with stable and dual pore system are beneficial for obtaining higher quality BDF to reduce our reliance on fossil fuels.

Effects of synthetic conditions on the Pd particle sizes of Pd/SBA-15 catalysts and their performance for the partial hydrogenation of biodiesel fuels

Effect of Pd Precursor Salts on the Chemical State, Particle Size, and Performance of Activated Carbon-Supported Pd Catalysts for the Selective Hydrogenation of Palm Biodiesel

Tuning the porosity of sulfur-resistant Pd-Pt/MCM-41 bimetallic catalysts for partial hydrogenation of soybean oil-derived biodiesel

Size-dependent halogenated nitrobenzene hydrogenation selectivity of Pd nanoparticles

Crucial Size Effect on Dicarbonylation of Acetylene over Pd/CsHPMo Heterogeneous Catalysts

Regulation of the Selective Hydrogenation Performance of Sulfur-Doped Carbon-Supported Palladium on Chloronitrobenzene

Effect of γ-Al2O3 Pore Structure on Activity of Supported Pd Catalysts in C9 Petroleum Resin Hydrogenation

Performance and sulfur poisoning of SiO2, γ-Al2O3, and SiO2-Al2O3-supported bimetallic Pd-Pt catalysts in selective hydrogenation of soybean oil-derived fatty acid methyl esters

Effect of La-Fe/Si-MCM-41 Catalysts and CaO Additive on Catalytic Cracking of Soybean Oil for Biofuel with Low Aromatics

Selective Hydrogenation of Bio-refined Succinic Acid to 1,4-Butanediol Using Palladium-Alumina Bi-functional Catalyst: Effects of Calcination Temperature, Pressure, and Reaction Time

Methyl oleate deoxygenation for production of diesel fuel aliphatic hydrocarbons over Pd/SBA-15 catalysts

Catalytic Cracking of Biodiesel Waste Using Metal Supported SBA-15 Mesoporous Catalysts

Nanoporous Carbon-Supported Bimetallic (Ni, Cu, and Fe)-Mo Catalysts for Partial Hydrogenation of Biodiesel

Catalytic Properties of Supported Pd/SBA-15 Catalyst for Selective Hydrogenation of Alkadienes

Diesel-like hydrocarbons obtained by direct hydrodeoxygenation of sunflower oil over Pd/Al-SBA-15 catalysts

The synergic effects of highly selective bimetallic Pt-Pd/SAPO-41 catalysts for the n-hexadecane hydroisomerization

Synergetic effect between the metal and acid sites of Pd/SAPO-41 bifunctional catalysts in n-hexadecane hydroisomerization

Effect of diffusion and metal-acid synergy on catalytic behavior of the Pd/Hierarchical SAPO-31 nanoparticles for hydroisomerization of n -hexadecane

Effects of Synthesis Procedures on Pt–Sn Alloy Formation and Their Catalytic Activity for Propane Dehydrogenation

Effects of surface functional groups of the N-containing carbon support on the catalytic properties of supported palladium

Oxygenate Reactions over PdCu and PdAg Catalysts: Distinguishing Electronic and Geometric Effects on Reactivity and Selectivity