Abstract:<p>Bio-oil, one of significant renewable energy, was blocked from its direct application by thermodynamic instability due to the high oxygen content, so its deoxygenation needs urgent solution. Avoiding the disadvantages of the traditional catalytic method, such as harsh reaction conditions, potential explosion risk and environmental pollution, we utilize solid-acidic zeolites as low-load Pd-based catalyst supports instead of corrosive acid additives, with polymethylhydrosiloxane (PMHS) as the hydrogen-supplying agent, to achieve efficient hydrodeoxygenation of bio-oil models (carbonyl compounds) under mild conditions. The reaction conditions such as Si/Al ratio of HZSM-5 zeolite, temperature, solvent, and the type of Pd salts precursor are optimized. In particular, we have found that polar protic solvents improve catalytic efficiency by promoting proton transfer in the reaction. In an open-to-air, 97.9% ethylbenzene yield can be obtained for acetophenone conversion under mild conditions (0.5 wt% Pd/HZSM-5(18), 65 °C, 3 h, n-butanol as solvent), which is more efficient and environmental friendly than currently reports. Meanwhile, hydrogenation–dehydration mechanism was proposed, and the Brønsted acid in HZSM-5 promotes the dehydration of the alcohol (rate-limiting step) by efficiently accelerating the removal of hydroxyl groups and the proton transfer of the reaction. Furthermore, the catalytic scheme exhibits the excellent stability (reusable seven times) and versatility. The potential of a green catalytic technology using with PMHS opens attractive opportunities for bio-oil upgrading.</p>

Diesel-like hydrocarbons obtained by direct hydrodeoxygenation of sunflower oil over Pd/Al-SBA-15 catalysts

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Methyl oleate deoxygenation for production of diesel fuel aliphatic hydrocarbons over Pd/SBA-15 catalysts

Mechanistic Insights into Hydrodeoxygenation of Acetone over Mo/HZSM-5 Bifunctional Catalyst for the Production of Hydrocarbons

Hydrodeoxygenation of Water-Insoluble Bio-Oil to Alkanes Using a Highly Dispersed Pd–Mo Catalyst

Hydrodeoxygenation of Methyl Palmitate over Supported Ni Catalysts for Diesel-like Fuel Production

Improved hydrodeoxygenation of bio-oil model compounds with polymethylhydrosiloxane by Brønsted acidic zeolites

Direct Hydrogenation and Hydrotreating of Neat Vegetal Oil into Renewable Diesel Using Alumina Binder with Zeolite

Hydrotreating of C18 fatty acids to hydrocarbons on sulphided NiW/SiO2-Al2O3

Spatial segregation of catalytic sites within Pd doped H-ZSM-5 for fatty acid hydrodeoxygenation to alkanes

Kinetics for the highly selective hybrid and cleaner diesel production by hydro-co-processing of a Jatropha curcas L. oil and gas oil blend using a supported Ni-W/Al-SBA-15 sulfided catalyst

Catalytic deoxygenation of stearic acid and waste cooking oil over Pd/SBA-15 for obtaining hydrocarbons with potential as renewable liquid fuels

Hydrogenation of High-Concentration Monovinylacetylene for Butadiene Production over Pd-Pb/SiO2 Catalysts

Efficient solvent-free hydrodeoxygenation of bio-lipids over bifunctional NiW catalyst: Manipulations of surface-active sites by thermal pretreatment

Design and Synthesis of a Novel Catalytic System Based on Pd Supported on Alumina Extrudates for Hydrotreating of PAO Lubricants

Palladium‐Catalyzed Transformation of Renewable Oils into Diesel Components

Catalytic Transfer Hydrogenation with Methanol over Pt/C Catalyst for Synergistic Hydrothermal Hydrogenation of Palmitic Acid

Catalytic hydrotreatment of fast pyrolysis oils using Ni-Cu/Al-MCM-41 catalysts