Abstract:The information presented in the article is an overview of the possibility of improving the mechanical properties of metals, alloys and sprayed coatings in order to obtain a dispersed, in particular, nanoscale substructure, which allows obtaining a set of unique operational characteristics, which, in turn, will increase the resource of parts of machines and mechanisms that are used in mechanical engineering.Today, the most common methodof nanostructuring is intensive plastic deformation (by friction, by equal-channel angular pressing, etc.), however, these methods can only be used for the manufacture of parts with a small cross-section, so the creation of new methods of deformation-thermal treatment is an urgent task of modern materials science.The paper shows the possibility of applying pre-deformation and pre-recrystallization heat treatment for technically pure iron, carbon steels of 1020 (сталь 20), 1045 (сталь 45), 1070 (сталь 70),A284Gr.D (Ст3) and C80W (У8) brands, alloyed steels of 5140H (40Х) and AISI 420 (20Х13) brands, Sv-08G2S (Св-08Г2С) gas-thermal and electric arc coatings, as well as Ni80Cr20 nichrome alloy and CuA19Mn2 (2.0960) bronze (БрАМц9-2).The work compares methods of static deformation with methods of intensive plastic deformation and shows that pre-recrystallization heat treatment allows to significantly strengthen metals (more than 30%) in combination with sufficient plasticity (for A284Gr.D (Ст3) steel, the relative elongation is up to 7.5%, and the relative narrowing is up to 75 %).The work presents the results of the experimental investigation of the influence of deformation and thermal factors on the mechanical properties, in particular, hardness and strength, of metals, alloys and sprayed coatings. It is established that the strengthening effect occurs due to the refinement of substructural elements, such as the size of coherent scatteringregions, the disorientation angle of subgrains, and the number of substructural elements to a nanoscale state. Thus, with the help of additional deformation followed by pre-recrystallization and heat treatment of carbon and alloyed steels, it is possible to obtain subgrains with a size of less than 200 nm with a disorientation angle of up to 2 ° with a relative amount of nanoscale subgrains of up to 65%.The possibility of industrial application of the proposed technology is shown on the example of production of regulating springs of membrane valves of pipelines made of 1070 (сталь 70) steel, which allows to increase the hardness by 19%.

A novel dual-strengthening technology combining external second phase nanoparticle method and hot compression deformation process in micro-alloyed medium carbon steel

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

Achieving excellent strength and ductility synergy by δ phase strengthening in low-density high-manganese steel

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Synergistic Effect of Al and Ni on Microstructure Evolutions and Mechanical Properties of Fe-Mn-Al-C Low-Density Steels

Medium Mn Dual-Phase Nanotwinned Steel

Microstructure and Mechanical Properties of a Novel Cold Rolled Medium-Mn Steel with Superior Strength and Ductility

Role and mechanism of innovative addition process of trace nano-TiC p in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

A novel process for simultaneously improving the strength and plasticity of 18Ni(350) maraging steel

Microstructure Characteristics, Mechanical Properties and Strain Hardening Behavior of B2 Intermetallic Compound-Strengthening Fe-16Mn-9Al-0.8C-3Ni Steel Fabricated by Twin-Roll Strip Casting, Cold Rolling and Annealing

Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel

Synergistic Effect of Alloying on the Strength and Ductility of High Carbon Pearlitic Steel

Synergetic effects of complex additions of Mo and Ni on the phase transformation behavior and mechanical properties of austenitic lightweight steels

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

Evolution of micropores and second phases during hot deformation of 2050 Al-Li alloy

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

The influence of annealing temperature on the microstructure and mechanical properties of Fe-0.52C-11Mn-5.14Al-1Cr lightweight Steel

A novel short-process manufacturing method of γ′-strengthened superalloy: Modulation of nano-scaled γ′ precipitates during hot deformation

CURRENT STATUS AND DEVELOPMENT PROSPECTS OF NANOSTRUCTURING OF DEFORMED METALS AND ALLOYS AND SPRAYED COATINGS

Effect of inclusions on toughness and microstructures in simulated coarse-grain heat-affected zones of Al/Ti deoxidised and Nb/V microalloyed steels