Synergistic Effect of Al and Ni on Microstructure Evolutions and Mechanical Properties of Fe-Mn-Al-C Low-Density Steels

Xiaodong Lv,Xuejiao Wang,Aidong Lan,Junwei Qiao

DOI: https://doi.org/10.3390/met14050495

IF: 2.695

2024-04-25

Metals

Abstract:In this study, the synergistic behavior of Ni and Al in two low-density steels (Fe-26Mn-10.2Al-0.98C-0.15V (wt. %) and Fe-29Mn-5Al-1C-12Ni (wt. %)) and their influence on microstructures and mechanical properties were investigated. The chemical composition of κ-carbides and B2 precipitated particles as a function of annealing and aging temperature and the matrix within which they formed were elucidated. The microstructures and deformation mechanisms of both steels were studied based on their strengthening contribution. The Fe-26Mn-10.2Al-0.98C-0.15V steel mainly realized precipitation strengthening through κ-carbides and grain boundary strengthening due to full recrystallization. The strengthening caused by Fe-29Mn-5Al-1C-12Ni steel was mainly due to the presence of the B2 phase in the matrix, which was non-coherent with FCC. This led to the Orowan bypass mechanism, which made precipitation strengthening the main strengthening contribution. The synergistic effect led to the shear or bypass mechanism of both steels when plane dislocation slip occurred. In addition, it also had an influence on the work-hardening capability during plastic deformation. This study provides a promising way to further enhance the yield strength of low-density austenitic steels through the synergistic effect of Ni and Al.

materials science, multidisciplinary,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

This paper aims to study the synergistic effect of Ni and Al in two low - density steels (Fe - 26Mn - 10.2Al - 0.98C - 0.15V (wt. %) and Fe - 29Mn - 5Al - 1C - 12Ni (wt. %)) and their influence on the microstructural evolution and mechanical properties. Specifically, the paper explores the changes in the chemical compositions of κ - carbides and B2 precipitates with annealing and aging temperatures as well as the matrices in which they form, and studies the microstructures and deformation mechanisms of the two steels based on the strengthening contributions of these precipitates. In addition, the paper also analyzes the work - hardening ability of these steels during plastic deformation.

Through this research, the author hopes to provide an effective method to further improve the yield strength of low - density austenitic steels through the synergistic effect of Ni and Al. This will not only help to improve the mechanical properties of materials but also meet the demand for lightweight materials in the automotive industry, thereby improving energy efficiency, reducing fuel consumption and environmental pollution pressure.