Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

Smooth polishing with non-linear compensation

Error Compensation in One-Point Inclined-Axis Nanogrinding Mode for Small Aspheric Mould

Computer-controlled Compensation for Wearing of Polishing Head

Fluid lubricated polishing based on shear thickening

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Compliant Polishing of Thin-Walled Freeform Workpiece

Design and constant force control of a parallel polishing machine

Position-independent Thermal Error Compensation and Evaluation Based on Linear Correlation Filtering Technology

A Normal Displacement Model and Compensation Method of Polishing Tool for Precision CNC Polishing of Aspheric Surface

A New Linear Interpolation Method with Lookahead for High Speed Machining

Nonlinear Analysis and Dynamic Compensation of Stylus Scanning Measurement with Wide Range

Regionalized compensation method for nonlinear error control

Active Compliance Smart Control Strategy of Hybrid Mechanism for Bonnet Polishing

Precise and smooth contact force control for a hybrid mobile robot used in polishing

A New Aspheric Surfaces Polishing by Parallel Orthogonality Movement/Force Servomechanism

B-spline Surface Approximation Method for Achieving Optimum Dwell Time in Deterministic Polishing

Research and application on the key techniques of conformal vibration polishing on optics

Simultaneous tool posture and polishing force control of unknown curved surface using serial-parallel mechanism polishing machine

A novel method for improving optical component smoothing quality in robotic smoothing systems by compensating path errors