Abstract:This study investigates an electrochemical approach for the treatment of water polluted with per- and poly-fluoroalkyl substances (PFAS), looking at the impact of different variables, contributions from generated radicals, and degradability of different structures of PFAS. Results obtained from a central composite design (CCD) showed the importance of mass transfer, related to the stirring speed, and the amount of charge passed through the electrodes, related to the current density on decomposition rate of PFOA. The CCD informed optimized operating conditions which we then used to study the impact of solution conditions. Acidic condition, high temperature, and low initial concentration of PFOA accelerated the degradation kinetic, while DO had a negligible effect. The impact of electrolyte concentration depended on the initial concentration of PFOA. At low initial PFOA dosage (0.2 mg L-1), the rate constant increased considerably from 0.079 ± 0.001 to 0.259 ± 0.019 min-1 when sulfate increased from 0.1% to 10%, likely due to the production of SO4•-. However, at higher initial PFOA dosage (20 mg L-1), the rate constant decreased slightly from 0.019 ± 0.001 to 0.015 ± 0.000 min-1, possibly due to the occupation of active anode sites by excess amount of sulfate. SO4•- and •OH played important roles in decomposition and defluorination of PFOA, respectively. PFOA oxidation was initiated by one electron transfer to the anode or SO4•-, undergoing Kolbe decarboxylation where yielded perfluoroalkyl radical followed three reaction pathways with •OH, O2 and/or H2O. PFAS electrooxidation depended on the chemical structures where the decomposition rate constants (min-1) were in the order of 6:2 FTCA (0.031) > PFOA (0.019) > GenX (0.013) > PFBA (0.008). PFBA with a shorter chain length and GenX with -CF3 branching had slower decomposition than PFOA. While presence of C-H bonds makes 6:2 FTCA susceptible to the attack of •OH accelerating its decomposition kinetic. Conducting experiments in mixed solution of all studied PFAS and in natural water showed that the co-presence of PFAS and other water constituents (organic and inorganic matters) had adverse effects on PFAS decomposition efficiency.

PFAS degradation by anodic electrooxidation: Influence of BDD electrode configuration and presence of dissolved organic matter

Enhanced Electrochemical Degradation of Per- and Polyfluoroalkyl Substances (PFAS) by Activating Persulfate on Boron-Doped Diamond (BDD) Anode

Investigating the Effect of Polarity Reversal of the Applied Current on Electrochemical Degradation of Per-and Polyfluoroalkyl Substances

Can Perfluorooctanoic Acid Be Effectively Degraded Using Β-Pbo2 Reactive Electrochemical Membrane?

Removal of PFAS from Aqueous Solution Using PbO2 from Lead-Acid Battery.

Mechanism and Reactive Species in a Fountain-Strip DBD Plasma for Degrading Perfluorooctanoic Acid (PFOA)

New Insights into the PFAS Defluorination Performance and Mechanism of Ultrasound-Enhanced Electrochemistry with Peroxydisulfate Electrolyte

Degradation of Perfluorinated Compounds on a Boron-Doped Diamond Electrode

Structural dependence of PFAS oxidation in a boron doped diamond-electrochemical system

Electrochemical oxidation of PFOA and PFOS in landfill leachates at low and highly boron-doped diamond electrodes

Enhanced perfluorooctanoic acid (PFOA) degradation by electrochemical activation of peroxydisulfate (PDS) during electrooxidation for water treatment

Electrochemical degradation of PFOA and its common alternatives: Assessment of key parameters, roles of active species, and transformation pathway

Electrochemical Oxidation of Perfluorooctane Sulfonate (PFOS) Substitute by Modified Boron Doped Diamond (BDD) Anodes

Electrocatalytic water treatment of per- and polyfluoroalkyl substances reduces adsorbable organofluorine and bioaccumulation potential

Enhanced Mitigation of Membrane Fouling and Degradation of Perfluorooctanoic Acid in the Treatment of Natural Surface Water Through the Application of Dielectric Barrier Discharge/sulfite

Impact of supporting electrolyte on electrochemical performance of borophene-functionalized graphene sponge anode and degradation of per- and polyfluoroalkyl substances (PFAS)

Electrochemical oxidation of perfluoroalkyl and polyfluoroalkyl substances: Mechanisms, implications, and challenges

Insights into the application of the anodic oxidation process for the removal of per- and polyfluoroalkyl substances (PFAS) in water matrices

Electrochemical Advanced Oxidation combined to Electro-Fenton for effective Treatment of Perfluoroalkyl substances "PFAS" in Water using a Magnéli phase-based Anode

[Selection of Electrochemical Anodic Materials for PFOA Degradation and Its Mechanism].

Efficient electro-oxidation-based degradation of per- and polyfluoroalkyl (PFAS) persistent pollutants by using plasma torch synthesized pure-Magnéli phase-Ti4O7 anodes