Abstract:A dual circulating fluidized bed reactor for chemical looping combustion of coal has the advantage of flexible regulation on oxygen carrier circulation, but there is always part of unconverted coal char escaping from the fuel reactor (FR), reducing the carbon capture efficiency of the whole unit. In this work, a numerical investigation is conducted using the computational particle fluid dynamics (CPFD) method to examine how to improve the carbon conversion in a 50 kWth coal-fueled dual circulating fluidized bed reactor for chemical looping combustion. The improvement strategies generally fall into two categories. The first category is based on the ideas of extending the residence time of char and strengthening the mixing between the char and oxygen carrier (OC), including enhancing the FR height, increasing the number of coal feeding points, and leading combustible gas generated in the gasification carbon stripper (GCS) to the FR. The second category is to physically separate char particles from the binary material stream in a carbon striper (CS) based on the difference of terminal velocity between the char and OC particles and then recycle the stripped char to the FR again. With respect to the 50 kWth reactor, in which a two-chamber GCS is coupled within the loop seal, the full-scale CPFD simulation reveals that, when the GCS is off, the carbon capture efficiency (solely contributed by the FR) is quite low (42.3%), even if some optimizations are adopted for the FR (two oppositely collocated coal feeding points, 56.4%; doubling the FR height, 58.7%). On the other side, when the GCS is on, the carbon capture efficiency reaches over 90% significantly. To further improve the carbon conversion in the reactor, a new non-mechanical valve integrated with a four-chamber CS/GCS is designed numerically in this paper, where three-dimensional CFPD simulation is conducted to optimize the key parameters, such as freeboard height, baffle height, flow rate of OC, and superficial velocity. The integrated and compact device can function as the loop seal and carbon stripper simultaneously, and it can be operated as not only the CS mode (char is physically separated from OC) but also the GCS mode (char is gasified, and then combustible products are recycled back to the FR; i.e., char is chemically separated from OC) by regulating the operational velocity and fluidization agent. The carbon capture efficiencies of GCS and CS modes are 97.8 and 98.9%, respectively. The CS mode is more economical in terms of the operational cost, because a large amount of steam is not required herein. Finally, by means of parallel comparisons on these strategies mentioned above in performance and cost, the optimal strategy to improve carbon conversion in the reactor is proposed successfully.

A novel coal chemical looping gasification scheme for synthetic natural gas with low energy consumption for CO2 capture: Modelling, parameters optimization, and performance analysis

Highly Efficient CO2 Capture and Utilization of Coal and Coke-Oven Gas Coupling for Urea Synthesis Process Integrated with Chemical Looping Technology: Modeling, Parameter Optimization, and Performance Analysis

Comprehensive optimization of coal chemical looping gasification process for low CO 2 emission based on multi-scale simulation coupled experiment

A new scheme for ammonia and fertilizer generation by coal direct chemical looping hydrogen process: Concept design, parameter optimization, and performance analysis

Optimal Design of a Coal-Based Synthetic Natural Gas (SNG) Process with Different Coal Ranks and Gasification Technologies Via Techno-Economic Analysis

Optimal design, thermodynamic, cost and CO2 emission analyses of coal-to-methanol process integrated with chemical looping air separation and hydrogen technology

Gasification for SNG-power cogeneration using coal as material integrated with calcium looping for enhancing CO2 absorption

A novel process design and techno-economic analysis for coal-based polygeneration process of synthetic natural gas, methanol and power

Energy consumption and greenhouse gas emissions of shale gas chemical looping reforming process integrated with coal gasification for methanol production

Dynamic optimal control of coal tar chemical looping gasification based on process modelling and intelligent screening

Pinch combined with exergy analysis for heat exchange network and techno-economic evaluation of coal chemical looping combustion power plant with CO<sub>2</sub> capture

Energy, Exergy, Economic and Environmental (4E) Analysis of an Integrated Process Combining CO2 Capture and Storage, an Organic Rankine Cycle and an Absorption Refrigeration Cycle

Numerical Investigation on the Improvement of Carbon Conversion in a Dual Circulating Fluidized Bed Reactor for Chemical Looping Combustion of Coal

Assessment of low‐rank coal and biomass co‐pyrolysis system coupled with gasification

Optimization of coal-to-liquid processes; A way forward towards carbon neutrality, high economic returns and effective resource utilization. Evidences from China

Modeling, optimization, and system evaluation of ammonia production processes by direct chemical looping of petroleum coke/coal

Optimization of Parameters and Thermodynamics of Gasification Process for Enhanced CO2 Capture in an IGCC System

An Advanced, Ammonia-Based Combined NOx/SOx/CO2 Emission Control Process Towards a Low-Cost, Clean Coal Technology

A clean coal utilization technology based on coal pyrolysis and chemical looping with oxygen uncoupling: Principle and experimental validation

System optimization and performance evaluation of shale gas chemical looping reforming process for efficient and clean production of methanol and hydrogen

A novel system of biomass for the generation of inherently separated syngas by combining chemical looping CO2-gasification and steam reforming process