Abstract:Synthetic natural gas (SNG) production from syngas is under investigation again due to the desire for less dependency from imports and the opportunity for increasing coal utilization and reducing greenhouse gas emission. CO methanation is highly exothermic and substantial heat is liberated which can lead to process thermal imbalance and deactivation of the catalyst. As a result, conversion per pass is limited and substantial syngas recycle is employed in conventional processes. Furthermore, the conversion of syngas to SNG is typically performed at moderate temperatures (275-325 degrees C) to ensure high CH4 yields since this reaction is thermodynamically limited. In this study, the effectiveness of a novel integrated process for the SNG production from syngas at high temperature (i.e. 600 degrees C) was investigated. This integrated process consists of combining a CO methanation nickel-based catalyst with a high temperature CO2 capture sorbent in a single reactor. Integration with CO2 separation eliminates the reverse-water-gas shift and the requirement for a separate water-gas shift (WGS) unit. Easing of thermodynamic constraint offers the opportunity of enhancing yield to CH4 at higher operating temperature (500-700 degrees C) which also favors methanation kinetics and improves the overall process efficiency due to exploitation of reaction heat at higher temperatures. Furthermore, simultaneous CO2 capture eliminates greenhouse gas emission. In this work, sorption-enhanced CO methanation was demonstrated using a mixture of a 68% CaO/32% MgAl2O4 sorbent and a CO methanation catalyst (Ni/Al2O3, Ni/MgAl2O4, or Ni/SiC) utilizing a syngas ratio (H-2/CO) of 1, gas-hour-space velocity (GHSV) of 22,000 h(-1), pressure of 1 bar and a temperature of 600 degrees C. These conditions resulted in similar to 90% yield to methane, which was maintained until the sorbent became saturated with CO2. By contrast, without the use of sorbent, equilibrium yield to methane is only 22%. Cyclic stability of the methanation catalyst and durability of the sorbent were also studied in the multiple carbonation-decarbonation cycle studies proving the potential of this integrated process in a practical application. (C) 2013 Elsevier B.V. All rights reserved.

Gasification for SNG-power cogeneration using coal as material integrated with calcium looping for enhancing CO2 absorption

A novel coal chemical looping gasification scheme for synthetic natural gas with low energy consumption for CO2 capture: Modelling, parameters optimization, and performance analysis

Techno-economic evaluation for coal-based polygeneration systems of heat, power, oil and synthetic natural gas

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

Sorption-enhanced Synthetic Natural Gas (SNG) Production from Syngas: A Novel Process Combining CO Methanation, Water-Gas Shift, and CO2 Capture

Thermodynamic Analysis of 350 MWe Coal Power Plant Based on Calcium Looping Gasification with Combined Cycle

Analysis on H2 production process integrated CaO/Ca(OH)2 heat storage and sorption enhanced staged gasification using calcium looping

Coal conversion to SNG: Thermochemical insights through kinetic-free modeling in entrained flow gasifier

Mineral Carbonation of CO2 with Utilization of Coal Gasification Slags Based on Chemical Looping

A novel process design and techno-economic analysis for coal-based polygeneration process of synthetic natural gas, methanol and power

Coal-based Synthetic Natural Gas (SNG): A Solution to China’s Energy Security and CO2 Reduction?

Development of Coal Partial Gasification and Combustion System

Optimal Design of a Coal-Based Synthetic Natural Gas (SNG) Process with Different Coal Ranks and Gasification Technologies Via Techno-Economic Analysis

Proposal and thermodynamic investigation of pressurized calcium looping integrated with chemical looping combustion for tail-end CO 2 capture in a retrofitted natural gas combined cycle power plant

A Multi-Product Cogeneration System Using Combined Coal Gasification and Combustion

Highly Efficient CO2 Capture and Utilization of Coal and Coke-Oven Gas Coupling for Urea Synthesis Process Integrated with Chemical Looping Technology: Modeling, Parameter Optimization, and Performance Analysis

Development of new technology for coal gasification purification and research on the formation mechanism of pollutants

Performance of hydrogen and power co-generation system based on chemical looping hydrogen generation of coal

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

Analysis of integrated CO 2 capture and utilization via calcium-looping in-situ dry reforming of methane and Fischer-Tropsch for synthetic fuels production

Biomass calcium looping gasification via cement-modified carbide slag in fluidized bed: an examination on enhanced multi-cycle CO2 capture and hydrogen production