Abstract:Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising ecofriendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 +/- 1.3 and 17.3 +/- 6.8 U, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 +/- 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during longterm operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Dual-electrolyte aluminum/air microfluidic fuel cell with electrolyte-recirculation

A dual-electrolyte aluminum/air microfluidic cell with enhanced voltage, power density and electrolyte utilization via a novel composite membrane

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

Continuous Flowing Membraneless Microbial Fuel Cells with Separated Electrode Chambers

A high-performance tri-electrolyte aluminum-air microfluidic cell with a co-laminar-flow-and-bridging-electrolyte configuration

Designing and multi-evaluation of a promising gas-emission anode for eliminating CO 2 accumulation in microfluidic fuel cell

A Water Collecting and Recycling Structure for Silicon-Based Micro Direct Methanol Fuel Cells

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

SUSTAINABLE ALKALINE MEMBRANE FUEL CELL

Mass Transportation Facilitated Porous Fe/Co Dual‐Site Catalytic Cathodes for Ultrahigh‐Power‐Density Al–Air Fuel Cells

High Power Density Direct Formate Microfluidic Fuel Cells with the Different Catalyst-Free Oxidants.

Microalgae hydrogel-derived monolithicfree-standing air cathode for microbial fuel cells: Tailoring the macroporous structure for enhanced bioelectricity generation

Development of hybrid aluminum-air battery fuel-cell system

Diffusion-layer-free air cathode based on ionic conductive hydrogel for microbial fuel cells

Unlaminated Carbon As Separator In Air-Cathode Single-Chamber Microbial Fuel Cells

A Li-air Fuel Cell with Recycle Aqueous Electrolyte for Improved Stability

A High-Performance Al-air Fuel Cell Using a Mesh-Encapsulated Anode Via Al–Zn Energy Transfer

Membrane/Electrode Interface Design for Effective Water Management in Alkaline Membrane Fuel Cells.

Cathodic Biofouling Control by Microbial Separators in Air-Breathing Microbial Fuel Cells

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

An Advanced Alkaline Al-Air Fuel Cell Using L-Ascorbic Acid Interface Layer Upon Al Anode Via Gradient Anti-corrosion