Abstract:Battery energy storage systems are widely used in modern electronic devices and electric vehicles. Metal-air batteries are among the electrochemical energy storage systems that provide high energy density and eco-friendly solutions. Aluminium-air batteries hold a significant advantage with their high theoretical specific energy and have the potential to replace lithium-ion batteries in the future. In this study, the electrical performance and corrosion inhibition characteristics of a polypropylene-based single and dual electrolyte system for aluminium-air batteries were investigated experimentally. The study revealed that a polypropylene separator can reduce the corrosion of the aqueous aluminium-air battery system by up to 40 %, improving the anodic utilization efficiency to 93 %. Electrochemical impedance spectroscopy analysis was used to characterize the single and dual electrolyte aluminium-air battery and propose equivalent circuit models. Compared to 1 M KOH electrolyte in a single electrolyte system, the solution resistance of a dual electrolyte aluminium-air battery was reduced by about 40 % using a combination of 1 M of KOH electrolyte and 1 M of H 2 SO 4 . This reduction is attributed to the enhancement of the oxygen reduction reaction at the air cathode. A high KOH electrolyte concentration will increase the corrosion of the aluminium anode but can improve the battery's voltage. At 3 M KOH electrolyte, the plateau voltage is recorded at about 0.6 V while the discharge time reached 44 min when using aluminium alloy 6061 as the anode. The battery model developed in this work provides a fundamental basis for predicting the performance of aluminium-air battery packs.

Development of hybrid aluminum-air battery fuel-cell system

High performance aluminum-air battery for sustainable power generation

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Hybrid high-concentration electrolyte significantly strengthens the practicability of alkaline aluminum-air battery

Characterization of the aluminium-air battery utilizing a polypropylene separator with corrosion inhibition ability

A High-Performance Al-air Fuel Cell Using a Mesh-Encapsulated Anode Via Al–Zn Energy Transfer

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Use of low-cost aluminum in electric energy production

Synergistic regulating the aluminum corrosion by ellagic acid and sodium stannate hybrid additives for advanced aluminum-air battery

Development of an Aluminum-Air Battery Using T6-6061 Anode as Electric Vehicle Power Source

Primary aluminum-air flow battery for high-power applications: Optimization of power and self-discharge

Effect of Tween 85 and Calcium Malate As Hybrid Inhibitors on the Performance of Alkaline Aluminum-Air Batteries

Synergistic construction of bifunctional interface film on anode via a novel hybrid additive for enhanced alkaline Al-air battery performance

Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Challenges and Strategies of Aluminum Anodes for High‐Performance Aluminum–Air Batteries

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

An Advanced Alkaline Al-Air Fuel Cell Using L-Ascorbic Acid Interface Layer Upon Al Anode Via Gradient Anti-corrosion

Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum