Abstract:This article presents a sustainable method for the catalytic reduction of both simple and binary dye systems using magnetic activated carbon (Fe 3 O 4 @AC) synthesized from almond shells, an agricultural waste biomass. The reduction of methylene blue (MB) and Congo red (CR) was investigated in the presence of NaBH 4 , and a series of physical-chemical experiments were conducted to elucidate the mechanism of dye conversion and its performance. The results confirmed the successful synthesis of Fe 3 O 4 nanoparticles on the activated carbon surface. The calculated rate constants in a simple system were 0.34 min− 1 for MB and 0.25 min− 1 for CR, in the binary system, the Fe 3 O 4 @AC catalyst demonstrated enhanced selectivity for the cationic MB dye, attributable to the robust, attractive surface charge. The study aimed to enhance catalytic performance by employing optimization curves generated from a three-level Box-Behnken Design (BBD) simulation. Experimental results indicated that the optimal catalyst dose, dye concentration, and reaction duration were 4–7 mg, 80–120 mg/L, and 5–20 min, respectively. Response surface methodology (RSM) was developed by processing the findings from 17 replicated experiments using a two-quadratic polynomial model, establishing a functional link between the experimental parameters and MB conversion. Optimal conditions for MB conversion were determined to be 7 mg of catalyst, 80 mg/L of MB concentration, and a reaction time of 12.5 minutes, resulting in an estimated conversion rate of 99.99 %. This prediction was validated by experimental findings, with regression analysis confirming a high correlation (R 2 > 0.99) between the predicted and observed values. Additionally, the Fe 3 O 4 @AC catalyst demonstrated good recyclability and stable performance over three consecutive cycles, maintaining high conversion efficiency without loss of performance. These findings demonstrate that Fe 3 O 4 @AC is a viable approach for the rapid and efficient remediation of dyes in water.

3D Pt@ZnAl-LDH catalyst on low-grade charcoal: A novel electrochemical platform for efficient textile dye degradation and glycerol oxidation

A novel electrocatalyst from TOCN/CGG hydrogel-supported Fe-rich sludge and its performance in treating azo dyes-contaminated water

Decolorization, degradation, and detoxification of textile dye and efficient hydrogen production by highly-stable MIL-177-LT@NiFe-LDH photoelectrocatalyst: Mechanism and economical studies

Regeneration of textile sludge into Cu8S5 decorated N, S self-doped interconnected porous carbon as an advanced bifunctional electrocatalyst for overall water splitting

Robust Self-Supported SnO2-Mn2O3@CC Electrode for Efficient Electrochemical Degradation of Cationic Blue X-GRRL Dye

Molten salt synthesis of porous graphene-like carbons as peroxydisulfate catalyst for the efficient removal of rhodamine B dye

A Flexible and Weavable Lignocellulose-Based Photocatalyst Supported by Natural Three-Dimensional Porous Juncus effusus for Highly Efficient Degradation of Environmental Contaminants

Thermal decomposition based fabrication of dimensionally stable Ti/SnO2–RuO2 anode for highly efficient electrocatalytic degradation of alizarin cyanin green

Combined EC-NMR and In Situ FTIR Spectroscopic Studies of Glycerol Electrooxidation on Pt/C, PtRu/C, and PtRh/C

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

Deep eutectic solvent-assisted dual valorization of waste distillers' grains-derived lignocellulose: pyrolyzed hydrochar microflowers-supported peroxymonosulfate activation and lignin carbon dots-aided Fe3+ detection

Nickel foam supported carbon nitride quantum dots as a sustainable catalyst for efficient electrocatalytic degradation of dyes

Optimization of the Acid blue 113 dye degradation in the three-dimensional electro persulfate process (3D/EPS) catalyzed by granular activated carbon (GAC) using the response surface methodology

Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

g-C3N4/CuO loaded polyester fabric as effective Fenton-like dip-catalyst for the oxidation of dyes

A novel composite anode via immobilizing of Ce-doped PbO2 on CoTiO3 for efficiently electrocatalytic degradation of dye

PtAu alloying-modulated hydroxyl and substrate adsorption for glycerol electrooxidation to C3 products

Advancing the eradication of harmful dyes through stereolithography-produced 3D floating photocatalysis: Exploiting the synergistic potential of graphene/MnO 2 /Fe 3 O 4 hybrid nanomaterials

Engineering Pt-Mn2O3 interface to boost selective oxidation of ethylene glycol to glycolic acid

A Novel Synthetic 3D Interconnected Porous Carbon-Rich Graphitic Carbon Nitride for Boosting Visible Light Photocatalytic Hydrogen Production and Dye Contaminant Degradation

Efficient Recycling of Glucose from Cellulose in Textiles Waste by Solid Catalysts