Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Lithium Ion Batteries: Atomic‐Distributed Coordination State of Metal‐Phenolic Compounds Enabled Low Temperature Graphitization for High‐Performance Multioriented Graphite Anode (Small 33/2020)

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

In-situ Generated Li3N/Li-Al Alloy in Reduced Graphene Oxide Framework Optimizing Ultra-Thin Lithium Metal Electrode for Solid-State Batteries

Scalable Production of the Silicon-Tin Yin-Yang Hybrid Structure with Graphene Coating for High Performance Lithium-Ion Battery Anodes

Stabilizing Graphite Anode in Electrolytes with Nanoscale Anion Networking for High-Rate Lithium Storage

Lithium‐Ion Batteries: Mechanochemical Synthesis of Γ‐graphyne with Enhanced Lithium Storage Performance (small 8/2019)

Laponite-Assisted Graphite Anode with a 3D Conductive and Interlinked Structure for Lithium-Ion Batteries

Lithium Storage Mechanism and Application of Micron‐Sized Lattice‐Reversible Binary Intermetallic Compounds as High‐Performance Flexible Lithium‐Ion Battery Anodes (Small 2/2022)

Early Lithium Plating Behavior in Confined Nanospace of 3D Lithiophilic Carbon Matrix for Stable Solid-State Lithium Metal Batteries.

Oriented‐Etched Graphite for Low‐Temperature Lithium‐Ion Batteries

A 3D Framework with Li3N-Li2S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium-Metal Anode

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Carbon-Based 3D Architectures as Anodes for Lithium-Ion Battery Systems

A Novel Graphene-Polysulfide Anode Material for High-Performance Lithium-Ion Batteries

A novel approach for synthesis of expanded graphite and its enhanced lithium storage properties

Three-dimensional Hierarchical Graphene and CNT-coated Spinel ZnMn2O4 As a High-Stability Anode for Lithium-Ion Batteries

Lithium Batteries with Nearly Maximum Metal Storage

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Three-Dimensional and Mesopore-Oriented Graphene Conductive Framework Anchored with Nano-Li 4 Ti 5 O 12 Particles as an Ultrahigh Rate Anode for Lithium-Ion Batteries.

Natural Graphite Modified with Nitrophenyl Multilayers As Anode Materials for Lithium Ion Batteries