Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Laponite-Assisted Graphite Anode with a 3D Conductive and Interlinked Structure for Lithium-Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Three-dimensional interconnected porous carbon nanoflakes with improved electron transfer and ion storage for lithium-ion batteries

Three‐Dimensional Interconnected Network of Graphene‐Wrapped Silicon/Carbon Nanofiber Hybrids for Binder‐Free Anodes in Lithium‐Ion Batteries

Graphite Nanoplates Firmly Anchored with Well-dispersed Porous Zn3V2O8 Nanospheres: Rational Fabrication and Enhanced Lithium Storage Capability

Lignin-Derived Holey, Layered, and Thermally Conductive 3D Scaffold for Lithium Dendrite Suppression

Fabrication of a Porous Copper/Graphite/Zirconium Oxide Hybrid Anode via Screen Printing for Lithium‐Ion Batteries

Synthesis Of 3d Nitrogen-Doped Graphene/Fe3o4 By A Metal Ion Induced Self-Assembly Process For High-Performance Li-Ion Batteries

Three-dimensional Porous Graphene Microsphere for High-Performance Anode of Lithium Ion Batteries

Direct Electrophoretic Deposition of Binder-Free Co3O4/Graphene Sandwich-Like Hybrid Electrode As Remarkable Lithium Ion Battery Anode

Three-Dimensional and Mesopore-Oriented Graphene Conductive Framework Anchored with Nano-Li 4 Ti 5 O 12 Particles as an Ultrahigh Rate Anode for Lithium-Ion Batteries.

3D Porous LiFePO4/graphene Hybrid Cathodes with Enhanced Performance for Li-ion Batteries

Active Fe2o3 Nanoparticles Encapsulated In Porous G-C3n4/Graphene Sandwich-Type Nanosheets As A Superior Anode For High-Performance Lithium-Ion Batteries

Enabling Lithium-Metal Anode Encapsulated in a 3D Carbon Skeleton with a Superior Rate Performance and Capacity Retention in Full Cells.

Engineering a heteroatom-doped multidimensional carbon network for dendrite-free lithium metal anode

Three-dimensional macroporous graphene/TiO2 nanocomposite as anode material for lithium ion batteries

Fabrication of Continuous Conductive Network for Li4Ti5O12 Anode by Cu-doping and Graphene Wrapping to Boost Lithium Storage

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

3D Lithiophilic Host Comprising Co2P Nanosheets and ZnO Nanorods for Stable Li Metal Anode

A Strategy of Selective and Dendrite-Free Lithium Deposition for Lithium Batteries

A Novel Graphene-Polysulfide Anode Material for High-Performance Lithium-Ion Batteries