Abstract:A series of thermosetting siloxane-containing polyimide resins were synthesized by incorporating of bis(p-aminophenoxy)dimethylsilane or bis(p-aminophenoxy)tetramethyldisiloxane with various concentrations into formulated oligoimides. These thermosetting polyimide resins exhibited good combination of processability and thermal resistance. It was found that siloxane-containing oligoimides provided significant advantages over unmodified oligoimides, relative to melt fluidity and processing window, due to the flexibility of D[(CH3)2SiO2/2] siloxy units. The siloxane-containing polyimide resins cured at 380 °C revealed relatively higher glass transition temperatures (Tg) than that of unmodified polyimides, despite the incorporation of flexible siloxane segment in oligoimides. Dynamic mechanical analysis and microstructure investigation suggested that some D[(CH3)2SiO2/2] siloxy units in the surface layer of polyimide transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units in the curing procedure besides crosslinking of phenylethynyl groups, due to oxidation crosslinking of siloxane. That led to inorganic silica-like structures formed in situ, and inter-connected by organic polyimide segments. This organic/inorganic hybrid characteristics endowed polyimide resins with enhanced thermal property. After post-curing at 450 °C, D[(CH3)2SiO2/2] siloxy units completely transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units, and the polyimide reins gave the Tg even exceeding 550 °C. Meanwhile, the corresponding T700 carbon fiber reinforced composite presented excellent mechanical property and durability at the temperature as high as 500 °C.

Mechanical properties of ormosils

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Bio-based epoxy functionalized MQ silicone resins: from synthesis to toughened epoxy composites with good mechanical properties, thermal resistance and transparency

Mechanical Properties of Silica Aerogels Prepared from A Mixture of Teos and Organo-Alkoxysilanes of Type R1six3

FT‐IR Study of the Hydrolysis and Polymerization of Tetraethyl Orthosilicate and Polydimethyl Siloxane in the Presence of Tetrabutyl Orthotitanate

Mechanical properties and thermal stability of ambient-cured thick polysiloxane coatings prepared by a sol-gel process of organoalkoxysilanes

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink

One-step sol–gel preparation of PDMS–silica ORMOSILs as environment-resistant and crack-free thick antireflective coatings

Reversibly Cross-Linking Amino-Polysiloxanes by Simple Triatomic Molecules. Facile Methods for Tuning Thermal, Rheological, and Adhesive Properties

Effect of Organosilicone on the Reaction Process of Functionalized Geopolymers

Facile synthesis of robust hybrid xerogels by an emulsion assistant method

Effects of metal oxides on the dielectric and mechanical properties of silicone rubber composites

Effect of Functionalization on the Properties of Silsesquioxane; a Comparison to Silica

Highly stretchable, soft and sticky PDMS elastomer by solvothermal polymerization process

Adjustable rheology of fumed silica dispersion in urethane prepolymers: Composition-dependent sol and gel behaviors and energy-mediated shear responses

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

One-pot synthesis of two different highly porous silica materials

Preparation and characterization of anticorrosion Ormosil sol–gel coatings for aluminum alloy

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

Robust Porous Organosilica Monoliths Via a Surfactant-Free High Internal Phase Emulsion Process for Efficient Oil-Water Separation.