Abstract:All-solid-state sodium batteries are promising candidates in energy storage applications due to their high safety and low cost. A suitable solid electrolyte is a key component for high-performance all-solid-state sodium battery. Current inorganic solid electrolytes mainly include oxide- and sulfide-based electrolytes. However, the oxide-based electrolytes require to be sinetred above 1000 ℃ for high ionic conductivity, and most sulfide-based electrolytes can react with H2O torelease toxic H2S gas. These features will hinder the practical application of all-solid-state sodium batteries. In recent years, novel sodium ionic conductors have appeared successively. Among them, anti-perovskite type of Li/Na ionic conductor has received a lot of attention because of its high ionic conductivity and flexible structure design. Nevertheless, the synthesis of Na-rich anti-perovskite Na3OBrxI1–x (0 < x < 1) is complex, the ionic conductivity at room temperature is relatively low, and its electrochemical properties remain unknown. Here in this work, the phase-pure Na-rich anti-perovskite Na3OBrxI1–x is synthesized by a facile synthesis way. The X-ray diffraction patterns show that the anti-perovskite structure without any impurity phase is obtained. Alternating-current (AC) impedance spectrum is used for measuring ionic conductivity of electrolyte pellets after thermally being treated at around 100 ℃. The Na3OBr0.3I0.7 exhibits an ionic conductivity of 1.47 × 10–3 S/cm at 100 ℃. Unfortunately, the ionic conductivity experiences a sharp drop with the decrease of temperature, which may be related to the change of structural symmetry and Na sites in the structure revealed by solid state 23Na NMR. In particular, the ionic conductivities of Na3OBrxI1–x demonstrate the potential applications at medium temperature (40－80 ℃ in which the ionic conductivity of Na3OBrxI1–x is close to or higher than 10–4 S/cm) for all-solid-state sodium battery. Therefore, the compatibility against Na metal and the electrochemical performance in all-solid-state batteries have been evaluated. Since Na3OBrxI1–x is not “Na-philic”, the resistance in impedance of the Na/Na3OBr0.5I0.5/Na is very high. However, after modifying the interface by ionic liquid, the Na3OBr0.5I0.5 exhibits good compatibility against Na metal and tiny ionic liquid also leads to high initial discharge specific capacity of 190 mAh/g and excellent cycling stability (around 127 mAh/g after 10 cycles) in the TiS2/Na3OBr0.5I0.5/Na-Sn solid-state battery. The capacity decay maybe results from the inferior interfacial contact between the solid electrolyte and the electrode materials because the electrode materials in this system experience large volume change during cycling. The successful operation in solid-state sodium batteries indicates that the Na3OBrxI1–x is feasible to be used as a sodium solid electrolyte, which is of great importance for practical application of Na-rich anti-perovskite solid electrolytes.

Enhancing carrier transfer properties of Na-rich anti-perovskites, Na4OM2 with tetrahedral anion groups: an evaluation through first-principles computational analysis.

Enhancing carrier transfer properties of Na-rich anti-perovskites, Na4OM2 with tetrahedral anion groups: an evaluation through first-principles computational analysis

Non-Arrhenius Ionic Conductivity Behaviour in Antiperovskite Solid Electrolytes for Sodium Metal Batteries

Sodium Ion Transport Mechanisms in Antiperovskite Electrolytes Na3obr and Na4oi2: an in Situ Neutron Diffraction Study

Theoretical design of Na-rich anti-perovskite as solid electrolyte: The effect of cluster anion in stability and ionic conductivity

Structural Manipulation Approaches Towards Enhanced Sodium Ionic Conductivity in Na-rich Antiperovskites

Investigation of Sodium-ion Transport Mechanism and Elastic Properties of Double Anti-perovskite Na3S0.5O0.5I

Boosting ionic conductivity of antiperovskite solid electrolyte by potassium ions substitution for cation clusters

Design Principles for Rotational Cluster Anion [BH4]− Promote Superionic Conductivity in Sodium-Rich Antiperovskite Na3OBH4

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Double Paddle‐Wheel Enhanced Sodium Ion Conduction in an Antiperovskite Solid Electrolyte

Facile Synthesis and Electrochemical Properties of Na-rich Anti-Perovskite Solid Electrolytes

Boosting the Na‐Ion Conductivity in the Cluster‐Ion Based Anti‐Perovskite Na2BH4NH2

Investigation of sulphate hydride anti-perovskite as solid electrolyte

Doping effects of conductivity improvement in anti-perovskite Na3OBr solid electrolytes

Balancing Vacancy and Carrier Concentration in Halide Solid Electrolytes for All-Solid-state Sodium Batteries

Local Structural Changes and Inductive Effects on Ion Conduction in Antiperovskite Solid Electrolytes

Rotational Cluster Anion Enabling Superionic Conductivity in Sodium-Rich Antiperovskite Na3OBH4.

Effect of Halogen Doping in Sodium Solid Electrolytes Based on the Na–Sn–Si–P–S Quinary System

Unlocking the chemical space in anti-perovskite conductors by incorporating anion rotation dynamics

Sodium Carbazolide and Derivatives As Solid-State Electrolytes for Sodium-Ion Batteries.