Abstract:All-solid-state sodium batteries are promising candidates in energy storage applications due to their high safety and low cost. A suitable solid electrolyte is a key component for high-performance all-solid-state sodium battery. Current inorganic solid electrolytes mainly include oxide- and sulfide-based electrolytes. However, the oxide-based electrolytes require to be sinetred above 1000 ℃ for high ionic conductivity, and most sulfide-based electrolytes can react with H2O torelease toxic H2S gas. These features will hinder the practical application of all-solid-state sodium batteries. In recent years, novel sodium ionic conductors have appeared successively. Among them, anti-perovskite type of Li/Na ionic conductor has received a lot of attention because of its high ionic conductivity and flexible structure design. Nevertheless, the synthesis of Na-rich anti-perovskite Na3OBrxI1–x (0 < x < 1) is complex, the ionic conductivity at room temperature is relatively low, and its electrochemical properties remain unknown. Here in this work, the phase-pure Na-rich anti-perovskite Na3OBrxI1–x is synthesized by a facile synthesis way. The X-ray diffraction patterns show that the anti-perovskite structure without any impurity phase is obtained. Alternating-current (AC) impedance spectrum is used for measuring ionic conductivity of electrolyte pellets after thermally being treated at around 100 ℃. The Na3OBr0.3I0.7 exhibits an ionic conductivity of 1.47 × 10–3 S/cm at 100 ℃. Unfortunately, the ionic conductivity experiences a sharp drop with the decrease of temperature, which may be related to the change of structural symmetry and Na sites in the structure revealed by solid state 23Na NMR. In particular, the ionic conductivities of Na3OBrxI1–x demonstrate the potential applications at medium temperature (40－80 ℃ in which the ionic conductivity of Na3OBrxI1–x is close to or higher than 10–4 S/cm) for all-solid-state sodium battery. Therefore, the compatibility against Na metal and the electrochemical performance in all-solid-state batteries have been evaluated. Since Na3OBrxI1–x is not “Na-philic”, the resistance in impedance of the Na/Na3OBr0.5I0.5/Na is very high. However, after modifying the interface by ionic liquid, the Na3OBr0.5I0.5 exhibits good compatibility against Na metal and tiny ionic liquid also leads to high initial discharge specific capacity of 190 mAh/g and excellent cycling stability (around 127 mAh/g after 10 cycles) in the TiS2/Na3OBr0.5I0.5/Na-Sn solid-state battery. The capacity decay maybe results from the inferior interfacial contact between the solid electrolyte and the electrode materials because the electrode materials in this system experience large volume change during cycling. The successful operation in solid-state sodium batteries indicates that the Na3OBrxI1–x is feasible to be used as a sodium solid electrolyte, which is of great importance for practical application of Na-rich anti-perovskite solid electrolytes.

Boosting the Na‐Ion Conductivity in the Cluster‐Ion Based Anti‐Perovskite Na2BH4NH2

Non-Arrhenius Ionic Conductivity Behaviour in Antiperovskite Solid Electrolytes for Sodium Metal Batteries

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Na3NH2B12H12 As High Performance Solid Electrolyte for All-Solid-state Na-ion Batteries

Theoretical design of Na-rich anti-perovskite as solid electrolyte: The effect of cluster anion in stability and ionic conductivity

Balancing Vacancy and Carrier Concentration in Halide Solid Electrolytes for All-Solid-state Sodium Batteries

Synthesis and Understanding of Na11Sn2PSe12 with Enhanced Ionic Conductivity for All-Solid-state Na-ion Battery

Vacancy-Controlled Na+ Superion Conduction in Na11Sn2PS12

NaSn2F5 nanocluster composed of nanoparticles with matched lattices induced by dislocations: Accelerated sodium-ion transport via in situ oxidation in solid-state sodium metal battery

Fast Sodium-Ion Conduction in a Novel Conjuncto-Hydroborate of Na4B20H18

Fast Sodium-Ion Conduction in a Novel Conjuncto -Hydroborate of Na 4 B 20 H 18

Sodium Octahydridotriborate as a Solid Electrolyte with Excellent Stability Against Sodium‐Metal Anode

Facile Synthesis and Electrochemical Properties of Na-rich Anti-Perovskite Solid Electrolytes

Sandwiched composite electrolyte with excellent interfacial contact for high-performance solid-state sodium-ion batteries

Boosting ionic conductivity of antiperovskite solid electrolyte by potassium ions substitution for cation clusters

SnF<sub>2</sub>-Induced Highly Current-Tolerant Solid Electrolytes for Solid-State Sodium Batteries

Boosting the interfacial superionic conduction of halide solid electrolytes for all-solid-state batteries

A Quaternary Sodium Superionic Conductor - Na10.8Sn1.9PS11.8

High-performance All-Solid-state Electrolyte for Sodium Batteries Enabled by the Interaction Between the Anion in Salt and Na3SbS4.

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

Plastic Crystal Polymer Electrolytes Containing Boron Based Anion Acceptors for Room Temperature All-Solid-state Sodium-Ion Batteries