Abstract:Organic liquid compound electrolytes are widely applied in conventional lithium-ion batteries. However, their disadvantages of unsafety and complexity of battery fabrication can hardly be avoided [1]. All-solid-state batteries without using liquid electrolytes provide an effective way to overcome these problems and studies on this field are increasing [2]. Solid electrolyte material is the critical factor to affect the electrochemical and cycle performances of all-solid-state batteries. For commercial application of all-solid-state batteries, high ionic conductivity and cyclability at room temperature are indispensable. Metal sulfides are in great potential to meet the practical application as solid electrolytes and a series of solid sulfur compounds with high ionic conductivities have been reported [3,4]. In this work, a new material Li17Ge2P3S20 with new crystal structure has been synthesized via a simple solid state reaction. The new structure is detected using XRD patterns as shown in Figure 1. AC impedance has been performed and the ionic conductivity of Li17Ge2P3S20 is determined to be 8.07×10-3 S/cm at room temperature. Experimental parameters have been optimized and elemental doping has been utilized to enhance the conductivity and stability of this material as solid electrolyte for all-solid-state lithium ion batteries. Acknowledgement This work was financially supported by the Shenzhen Peacock Plan (KQCX20140522150815065)，the Natural Science Foundation of Shenzhen ( JCYJ20150331101823677) and the Science and Technology Innovation Foundation for the Undergraduates of SUSTC(2015x19 and 2015x12) References: [1] Etacheri V, Marom R, Elazari R, et al. Challenges in the development of advanced Li-ion batteries: a review[J]. Energy & Environmental Science, 2011, 4(9): 3243-3262. [2] Notten P H L, Roozeboom F, Niessen R A H, et al. 3‐D integrated all‐solid‐state rechargeable batteries[J]. Advanced Materials, 2007, 19(24): 4564-4567. [3] Kamaya N, Homma K, Yamakawa Y, et al. A lithium superionic conductor[J]. Nature materials, 2011, 10(9): 682-686. [4] Kato Y, Hori S, Saito T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030. Figure 1

A Functional Air-Stable Li 9.8 GeP 1.7 Sb 0.3 S 11.8 I 0.2 Superionic Conductor for High-Performance All-Solid-State Lithium Batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

Superionic Conduction and Interfacial Properties of the Low Temperature Phase Li7P2S8Br0.5I0.5

An Iodide-Based Li 7 P 2 S 8 I Superionic Conductor

All-solid-state lithium–sulfur batteries based on a newly designed Li7P2.9Mn0.1S10.7I0.3 superionic conductor

Li10Ge(P1–xSbx)2S12 Lithium-Ion Conductors with Enhanced Atmospheric Stability

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

A high conductivity oxide–sulfide composite lithium superionic conductor

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Chemistry Design Towards a Stable Sulfide‐Based Superionic Conductor Li4Cu8Ge3S12

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

Li-Ion Cooperative Migration and Oxy-Sulfide Synergistic Effect in Li14 P2 Ge2 S16-6 x Ox Solid-State-Electrolyte Enables Extraordinary Conductivity and High Stability

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

A Li2CuPS4 Superionic Conductor: a New Sulfide-Based Solid-State Electrolyte

Thio‐/LISICON and LGPS‐Type Solid Electrolytes for All‐Solid‐State Lithium‐Ion Batteries

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

An Air‐Stable and Li‐Metal‐Compatible Glass‐Ceramic Electrolyte enabling High‐Performance All‐Solid‐State Li Metal Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

Aluminum based sulfide solid lithium ionic conductors for all solid state batteries

A High-Entropy Multicationic Substituted Lithium Argyrodite Superionic Solid Electrolyte

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries