Abstract:In this study, deposition of copper nanoparticles is synthesized by nanocomposite of carbon nanotube oxide modified with poly citric acid (Cu@CNTO/PCA) and a mixture of amine and poly citric acid (Cu@CNTO-amine/PCA) in different weight concentrations. The thickness, weight, conductivity and resistance of electrical, and hardness of the copper coating on the electrode are calculated after optimizing the parameters of current density (3000 mV), deposition time (45 min), stirring speed (300 rpm), and pH (2–3) at ambient temperature. To analyze the copper coating created on the electrode, the most well-known and widely used techniques are used: Fourier Transform Infrared spectroscopy (FT-IR), Atomic Force Microscope (AFM), Field Emission Scanning Electron Microscope (FE-SEM), and X-ray Energy Diffraction spectroscopy (EDX). The addition of carbon nanotubes enhances the process of nucleation and modification of grains and reduces the oxidation of copper, thus improving the mechanical properties of the copper coating. So, the electrical conductivity of the copper coating reaches 1526 μs.cm −1 in 40 wt.% of Cu@CNTO-amine/PCA nanocomposite at a current density of 3000 mV. Another advantage of this deposition method is at ambient temperature so that the copper coating turns black when the temperature increases to 35 °C. The modification of the surface with poly citric acid causes more dissolution and distribution of CNTO in the electrolyte solution keeps the pH of the environment in the range of 2–3 during deposition and causes the synthesis of shiny copper coatings. Urea-containing nanocomposite increases the electrical conductivity and stability of the copper coating, and compared to graphene oxide nanoparticles, it solves the problems of oxygen functional groups and provides its thermal stability. The results show that the thickness of the encapsulated copper coating layer depends on the chemical composition of the electrolyte, temperature, current duration, and current intensity. By controlling these factors, the thickness of the coated copper layer can be adjusted in the range of 1 to 10 μm. The method employed in this paper enables the controlled synthesis of metal-nanomaterial composites that can potentially be processed into high-capacity electrical conductors.

Preparation and anti-oxidation properties of carbon-coated copper nanoparticles

A Catalytic Oxidation Approach to Coat Copper Powder with Polyaniline

Preparation and Stability of Copper Particles Formed Using Amino-Terminated Dendrimer As Template

Preparation and anti-oxidisation resistance of silver-coated copper powders by cobalt-modified copper powders

Fabrication Of Fully Covered Cu-Ag Core-Shell Nanoparticles By Compound Method And Anti-Oxidation Performance

Antioxidative Effect of Lactic Acid-Stabilized Copper Nanoparticles Prepared in Aqueous Solution

Preparation of Carbon-Coated Copper Nanoparticles by Detonation Decomposition of Copper Ion Doped Sol–gel Explosive Precursors

Fabrication and performance of silver coated copper powder

Manipulating Cu Nanoparticle Surface Oxidation States Tunes Catalytic Selectivity Toward CH4 or C2+ Products in CO2 Electroreduction

Preparation of Copper Nanoparticles by Radiation

Preparation and oxidation protection of β-CuSCN coatings for fine copper powder

Preparation of silver-coated copper powder and its oxidation resistance research

Synthesis and characterization of the copper nanoparticles

Preparation of Antioxidative Nano Copper Pastes for Printed Electronics Application

Copper induced hollow carbon nanospheres by arc discharge method: controlled synthesis and formation mechanism

Preparation of Copper Nanoparticles on Carbon Nanotubes by Electroless Plating Method

Synthesis and antimicrobial studies of nano-copper doped carbon substrates; activated carbon, reduced graphene oxide, and carbon nanofiber

Anti-oxidation Technique of Conductive Ultrafine Copper Powder

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

Increasing Electrical Conductivity of Copper Nanocomposite By Carbon Nanotube Oxide Modified With Poly Citric Acid And Urea

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma