Abstract:The design and safety assessment of Lead-cooled Fast Reactors (LFRs), being one of the Generation IV technologies, must be supported by extensive experimental campaigns. Such activities are necessary to completely understand the physical phenomena involved in such reactors, as well as to properly develop new numerical tools or validate the pre-existent ones. From the experimental point of view, ENEA Research Center of Brasimone is one of the most active institutions, thanks to its experimental platforms and know-how maturated since the early 2000s. From the numerical point of view, Computational Fluid Dynamics (CFD) codes are the most suitable ones to analyze some phenomena expected in a Heavy Liquid Metal (HLM)-cooled reactor, such as the complex 3D phenomena occurring within the pools or the core fuel assemblies. In addition, the fluid thermal conduction, usually neglected in a System Thermal-Hydraulic (STH) code, can assume a significant importance in some transient scenarios, e.g., loss of flow accidents with transition from forced to natural circulation. However, the safety analysis of the LFRs should still rely on the use of STH codes because of their lower computational cost compared to the CFD codes, also considering the high number of transient evolutions to be analyzed for the purpose of the reactor licensing. At ENEA Brasimone, a novel coupling approach has been developed to couple the CFD code Ansys CFX with the STH code RELAP5/Mod3.3. The coupled tool aims at exploiting the advantages of the two families of codes. It adopts a multi-scale approach to simulate in detail some circuit components while performing system-level analysis, so as to keep an acceptable computational time. The coupling technique is based on ad-hoc user routines written in FORTRAN and implemented in Ansys CFX, which acts as the master code. The user routines take care of time step management, data exchange, RELAP5 execution, and error checking. The goal of this paper is to assess the simulation capabilities of the coupled tool by reproducing a forced-to-natural-circulation transition test, carried out at the NACIE-UP facility, with LBE as working fluid. The work has been realized in the framework of the IAEA Coordinate Research Project-I31038, named "Benchmark of Transition from Forced to Natural Circulation Experiment with Heavy Liquid Metal Loop".

Benchmark exercise on ELSMOR passive heat removal system

Analysis of the experimental tests performed at NACIE-UP facility through a novel CFX-RELAP5 codes coupling

Analysis of a Selected Experiment of the OSU-MASLWR Test Facility Regarding Heat Transfer in Helically Coiled Steam Generators Using AC2-ATHLET

Pre-test analysis of low power operations of STEAM, the EU-DEMO steam generator mock-up facility

ELSMOR - towards European Licensing of Small Modular Reactors: Methodology recommendations for light-water small modular reactors safety assessment

RELAP5-based thermal-hydraulic assessment of the STEAM facility for DEMO WCLL balance of plant analysis

Thermal-hydraulic assessment of the Steam Generator mock-up for the EU DEMO WCLL using CFD co-simulation

Simulation Model of a Passive Decay Heat Removal System for Lead-Cooled Fast Reactors

The H2020 McSAFER Project: Main Goals, Technical Work Program, and Status

Transient analysis of SIRIO using RELAP5/MOD3.3 system code

System code simulation of DEMO WCLL central outboard blanket equatorial cell operational transients

Development of a Steam Generator Mock-Up for EU DEMO Fusion Reactor: Conceptual Design and Code Assessment

Experimental Investigation on the Heat Removal Capacity of Secondary Side Passive Residual Heat Removal System for an Integrated Reactor

Scaling-up assessment of natural circulation phenomena in integral Small Modular Reactor by TRACE code

CFD Validation of Forced and Natural Convection for the Open Phase of IAEA Benchmark CRP-I31038

Numerical Study on Benchmark Analysis of Nacie-Up Facility with Uniform and Non-Uniform Power Distribution

Fuel performance code to code comparative analysis for the OECD/NEA MPCMIV benchmark

Scaling methodologies and similarity analysis for thermal hydraulics test facility development for water-cooled small modular reactor

Code improvement, separate-effect validation, and benchmark calculation for thermal-hydraulic analysis of helical coil once-through steam generator

Test Series D experimental results for SIMMER code validation of WCLL BB in-box LOCA in LIFUS5/Mod3 facility

Critical configuration of a SMR based on CAREM 25 using the SERPENT code