Abstract:There are heat transfer correlations for heat transfer analysis in single tube geometries after several experimental and theoretical heat transfer studies in these single tube geometries. This is not the case for heat transfer analysis in rod bundle geometry with regard to proposed square fuel assembly of the Supercritical-Water-Cooled Reactor (SCWR) European Atomic Energy (EURATOM) design. Thus limited heat transfer studies exist on rod bundle geometry at supercritical pressures. Heat transfer correlations with accurate prediction capabilities of coolant and wall temperatures will be helpful in carrying out heat transfer studies at supercritical pressures. This paper presents the performance of twelve selected heat transfer correlations assessed on the 1/8th bare square fuel assembly of the SCWR EURATOM design using Simulation of Turbulent flow in Arbitrary Regions Computational Continuum Mechanics C ++ based code (STAR-CCM + CFD code). The obtained numerical results were compared with the results obtained by Waata numerical experimentation. Overall, the Cheng et al. correlation provided the most satisfying prediction for the wall temperatures in all the sub-channels and captured closely Wataa's Numerical data. The maximum wall temperature was obtained in sub-channel 9, the hottest sub-channel and exceeded the design limit 620 °C by 60 °C for the Cheng correlation. The difference in temperature between the hottest and coldest sub-channels 9 and 1 respectively was approximately 80 °C. It was found that Cheng correlation is best suited for heat transfer prediction in rod bundle geometry at supercritical pressures with regard to the proposed square fuel assembly of the SCWR EURATOM design. It was also found that the different numerical tools adopted for this study and Waata study were able to capture the trends of normal, enhanced and deteriorated heat transfer regimes normally observed at supercritical pressures. Nevertheless, experimental investigations involving rod bundles adopted in this study should be conducted to validate the results obtained numerically and address the inconsistency of the conclusions drawn when compared with Waata data and other similar studies.

Analysis of a Selected Experiment of the OSU-MASLWR Test Facility Regarding Heat Transfer in Helically Coiled Steam Generators Using AC2-ATHLET

Assessment of heat transfer correlations in the sub-channels of proposed rod bundle geometry for supercritical water reactor

Scaling methodologies and similarity analysis for thermal hydraulics test facility development for water-cooled small modular reactor

Benchmark exercise on ELSMOR passive heat removal system

Analysis of Transient Characteristics and Design Improvement of the Passive Residual Heat Removal System of NHR-200-II

Numerical Investigation of Process Parameter Effects on Flow Oscillations in a Natural Circulation Boiling Integral PWR-Type SMR Test Rig

Coupled AC 2 -CFD simulations for a high-pressure core melt accident scenario

Scaling-up assessment of natural circulation phenomena in integral Small Modular Reactor by TRACE code

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Development and application of the helically coiled once-through steam generator module for dynamic simulation of nuclear hybrid energy system

Numerical Investigation on Heat Transfer Features of Gas-Cooled Open Lattice Reactor in Normal Operations

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Thermal hydraulic preliminary calculations for small modular reactor based on ACPR50S technology

Multicomponent gas mixture parametric CFD study of condensation heat transfer in small modular reactor system safety

CFD Analysis of the Steam Side in a Cross-Flow X-Type Steam Superheater

Flow mixing and heat transfer deterioration investigation of supercritical carbon dioxide in wire-wrapped bundles

CFD investigation on start-up transient of HPR1000 secondary side passive residual heat removal heat exchanger

Comparative Thermal Analyses Between Theoretical Mode and RELAP5 Code Simulation for OTSG of a Small PWR

CFD validation of condensation heat transfer in scaled-down small modular reactor applications, Part 1: Pure steam

NuScale-like SMR Model Development and Applied Safety Analyses with the Code Chain Serpent-DYN3D-ATHLET

Two-Step Procedure for Liquid-Salt-Cooled-Reactor Analysis