Abstract:A series of samples with the precursor's molar ratio of {KMn8O16}/{CuFe2O4} = 0, 0.008, 0.010, 0.016, and 0.020 were successfully synthesized for selective catalytic reduction of NO by CO. The physicochemical properties of all samples were studied in detail by combining the means of X-ray photoelectron spectroscopy, H2-temperature-programmed reduction, scanning electron microscopy mapping, X-ray diffraction (XRD), N2 physisorption (Brunauer-Emmett-Teller), NO + CO model reaction, and in situ Fourier transform infrared spectroscopy techniques. The results show that three phases of γ-Fe2O3, CuFe2O4, and CuO, which have strong synergistic interaction, coexist in this catalyst system, and different phases play a leading role in different temperature ranges. Mn species are highly dispersed in the three-phase coexisting system in the form of Mn2+, Mn3+, and Mn4+. Because of the strong interaction between Mn2+ and Fe species, a small amount of Cu2+ precipitates from CuFe2O4 and grows along the CuO(110) plane, which has better catalytic performance. Mn3+ can inhibit the conversion of γ-Fe2O3 to α-Fe2O3 at high temperature and then increases the high-temperature activity. The synergistic effect between Mn4+ and the surfaces of three phases generates active oxygen species Cu2+-O-Mn4+ and Mn4+-O-Fe3+, which can be more easily reduced to some synergistic oxygen vacancies during the reaction. Furthermore, the formed synergistic oxygen vacancies can promote the dissociation of NO and are also propitious to the transfer of oxygen species. All of these factors make the appropriate manganese-modified three-phase coexisting system have better catalytic activity than the manganese-free catalyst, making NO conversion rate reach 100% at around 250 °C and maintain to 1000 °C. Combining comprehensive analysis of various characterization results and in situ infrared as well as XRD results in the equilibrium state, a new possible NO + CO model reaction mechanism was temporarily proposed to further understand the catalytic processes.

Insight into the mechanism of simultaneous removal of NO x and toluene by MnCuTi ternary catalyst

One-pot synthesis of dual-phase manganese dioxide for toluene removal: Effect of crystal phase blending level on oxygen species and activity

Synergistic removal of nitrogen oxides and toluene and their interaction mechanism on Cu-MnO 2 catalyst

Mutual Inhibition Mechanism of Simultaneous Catalytic Removal of NOx and Toluene on Mn-based Catalysts.

The influencing mechanism of NH3 and NOx addition on the catalytic oxidation of toluene over Mn2Cu1Al1Ox catalyst

Experiment and mechanism investigation on simultaneously catalytic reduction of NO x and oxidation of toluene over MnOx/Cu-SAPO-34

Design of bimetallic catalyst with dual-functional Cu-Ce sites for synergistic NO X and toluene abatement

Bifunctional Catalyst of CuMn-HZSM-5 for Selective Catalytic Reduction of NO and CO Oxidation under Oxygen Atmosphere

Tandem Catalysis for Simultaneous Removal of NOx and C3H8 with Inhibition of N2O

Synergistic Promotion Effect Between NO X and Chlorobenzene Removal on MnO X-Ceo2 Catalyst.

Performance of transition metal (Cu, Fe and Co) modified SCR catalysts for simultaneous removal of NO and volatile organic compounds (VOCs) from coal-fired power plant flue gas

Copper/Nickel/Cobalt modified molybdenum-tungsten-titanium dioxide-based catalysts for multi-pollution control of nitrogen oxide, benzene, and toluene: Enhanced redox capacity and mechanism study

Synergetic Removal of Elemental Mercury and NO over TiCe0.25Sn0.25Ox Catalysts from Flue Gas: Performance and Mechanism Study

Bifunctional catalysts V-Cu/TiO 2 for selective catalytic reduction of NO x and CO oxidation under oxygen-rich conditions

Unraveling the multi-pollutant removal using M-MoWTi (M = Fe, Mn, Cr) catalyst: experiment and mechanistic study of competition for active sites

Mn-Modified CuO, CuFe2O4, and Γ-Fe2o3 Three-Phase Strong Synergistic Coexistence Catalyst System for NO Reduction by CO with a Wider Active Window.

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Insight to the cooperation between electronic unsaturated metal sites and hydroxyl species improves the SO 2 resistance of Fe-MnO 2 @TiO 2 for simultaneous removal of toluene and NO

Interaction Mechanism for Simultaneous Elimination of Nitrogen Oxides and Toluene over the Bifunctional CeO2-TiO2 Mixed Oxide Catalyst

New insights and reaction mechanisms in the design of catalysts for the synergistic removal of NOx and VOCs from coke oven flue gas: Dual regulation of oxidative properties and acidic sites

Surface Properties and Catalytic Performance of La0.8K0.2CuxMn1–xO3 for Simultaneous Removal of NOx and Soot