Abstract:Ammonia selective catalytic reduction (NH3-SCR) coupled with CO oxidation is a promising approach for simultaneous removal of NOx and CO. However, finding a bifunctional catalyst that can effectively facilitate both reactions remains a significant challenge. This study investigates the enhancing effect of Cu+-Sm3+-Ov-Ti4+ asymmetric active sites on the oxidation reaction of NH3-SCR coupled with CO oxidation. The traditional Cu/TiO2 catalyst can achieve a maximum NOx conversion of 75 % at 225 °C, while the CuSmOTi catalyst can achieve 100 % NOx conversion at 200 °C. The successful construction of the asymmetric active site leads to an increase in Cu+ content, producing abundant oxygen vacancies, accelerating the redox cycle in the reaction process, and improving the adsorption capacity of CO. Additionally, compared with the 8.4 % Cu dispersion on the Cu/TiO2 catalyst, the Cu dispersion on the SmCuOTi catalyst is as high as 75.0 %, which improves the reduction performance of the catalyst. A large number of Lewis acid sites optimize the activation and adsorption of the catalyst to the reactants. In-situ DRIFTS analysis indicates that the NH3-SCR reaction on the CuSmOTi catalyst primarily follows the (E-R) mechanism, while CO oxidation follows the (MvK) mechanism. Moreover, the formation of a significant number of amide intermediates during the reaction process enhances the N2 selectivity. These findings present a novel concept of utilizing asymmetric active sites in NH3-SCR coupled with CO oxidation reactions, provides valuable insights for achieving the complete removal of nitrogen oxides and carbon monoxide in the case of “0″ by-products.

Experiment and mechanism investigation on simultaneously catalytic reduction of NO x and oxidation of toluene over MnOx/Cu-SAPO-34

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

The influencing mechanism of NH3 and NOx addition on the catalytic oxidation of toluene over Mn2Cu1Al1Ox catalyst

Mutual Inhibition Mechanism of Simultaneous Catalytic Removal of NOx and Toluene on Mn-based Catalysts.

Synergistic removal of nitrogen oxides and toluene and their interaction mechanism on Cu-MnO 2 catalyst

The Deactivation Mechanism of Toluene on MnOx-CeO2 SCR Catalyst

Insight into the mechanism of simultaneous removal of NO x and toluene by MnCuTi ternary catalyst

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Boosting simultaneous catalytic removal of NOx and toluene via cooperation of Lewis acid and oxygen vacancies

Interaction Mechanism for Simultaneous Elimination of Nitrogen Oxides and Toluene over the Bifunctional CeO2-TiO2 Mixed Oxide Catalyst

Simultaneous abatement of NO x and CO using tandem catalyst system via reactant- and energy- Co-promoting effect

Novel insights for simultaneous NOx and CO Removal: Cu+-Sm3+-Ov-Ti4+ asymmetric active site promoting NH3-SCR coupled with CO oxidation reaction

Mechanistic Investigation of the Enhanced SO2 Resistance of Co-modified MnOx Catalyst for the Selective Catalytic Reduction of NOx by NH3

Impact of NOx and NH3 addition on toluene oxidation over MnOx-CeO2 catalyst

Mechanism of NO reduction by NH3 over MnCuOx catalysts and the influence mechanism of CO

Synergistic Removal of NOx and VOCs from Flue Gas on Mn-Based Catalysts

Mechanism Study Of No Catalytic Oxidation Over Mnox/Tio2 Catalysts

Interplay Effect on Simultaneous Catalytic Oxidation of NO and Toluene over Different Crystal Types of MnO2 Catalysts

Structures and Catalytic Performances of Me/SAPO-34(Me=Mn,Ni,Co) Catalysts for Low-Tem Perature SCR of NO X by Ammonia

an e ffi cient catalyst for the low-temperature selective catalytic reduction of NO x with NH 3

Interactions between CO oxidation and selective catalytic reduction of NO with NH3 over Mn-based catalysts