Abstract:Widespread use of printed electronics is limited by nozzle clogging and ink formulation constraints. To address this, a novel nozzle‐free printing technology called shock‐wave jet printing (SJP), enabled by laser‐generated focused ultrasound is explored. Performance of SJP‐printed and inkjet‐printed carbon nanotube thin film transistors is compared. SJP demonstrates 6x higher maximum mobility and successfully printed stored/unsonicated ink, whereas IJP suffered from nozzle clogging due to CNT agglomeration. Printed electronics have made remarkable progress in recent years and inkjet printing (IJP) has emerged as one of the leading methods for fabricating printed electronic devices. However, challenges such as nozzle clogging, and strict ink formulation constraints have limited their widespread use. To address this issue, a novel nozzle‐free printing technology is explored, which is enabled by laser‐generated focused ultrasound, as a potential alternative printing modality called Shock‐wave Jet Printing (SJP). Specifically, the performance of SJP‐printed and IJP‐printed bottom‐gated carbon nanotube (CNT) thin film transistors (TFTs) is compared. While IJP required ten print passes to achieve fully functional devices with channel dimensions ranging from tens to hundreds of micrometers, SJP achieved comparable performance with just a single pass. For optimized devices, SJP demonstrated six times higher maximum mobility than IJP‐printed devices. Furthermore, the advantages of nozzle‐free printing are evident, as SJP successfully printed stored and unsonicated inks, delivering moderate electrical performance, whereas IJP suffered from nozzle clogging due to CNT agglomeration. Moreover, SJP can print significantly longer CNTs, spanning the entire range of tube lengths of commercially available CNT ink. The findings from this study contribute to the advancement of nanomaterial printing, ink formulation, and the development of cost‐effective printable electronics.

Inkjet-Printed Transistors with Coffee Ring Aligned Carbon Nanotubes

Ultrathin High-Mobility SWCNT Transistors with Electrodes Printed by Nanoporous Stamp Flexography

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Capillary Flow Printing of Submicron Carbon Nanotube Transistors

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Ink-Jet Printed Thin-Film Transistors with Carbon Nanotube Channels Shaped in Long Strips

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

Transfer printing approach to all-carbon nanoelectronics

Semiconducting carbon nanotube network thin-film transistors with enhanced inkjet-printed source and drain contact interfaces

Inkjet-Printing-Based Density Profile Engineering of Single-Walled Carbon Nanotube Networks for Conformable High-On/Off-Performance Thin-Film Transistors

Printed thin film transistors and CMOS inverters based on semiconducting carbon nanotube ink purified by a nonlinear conjugated copolymer

Nozzle‐Free Printing of CNT Electronics Using Laser‐Generated Focused Ultrasound

Printed thin film transistors with 108 on/off ratios and photoelectrical synergistic characteristics using isoindigo-based polymers-enriched (9,8) carbon nanotubes

Inkjet-Printed Molybdenum Disulfide and Nitrogen-Doped Graphene Active Layer High On/Off Ratio Transistors

Carbon Nanotube Thin Film Transistors Fabricated by an Etching Based Manufacturing Compatible Process

Inkjet-printed p-type tellurene and n-type MoS 2 transistors for CMOS electronics

Reduced graphene oxide with a highly restored π-conjugated structure for inkjet printing and its use in all-carbon transistors

Short Channel Carbon Nanotube Thin Film Transistors with High On/off Ratio Fabricated by Two-Step Fringing Field Dielectrophoresis

Inkjet Printing High-Resolution, Large-Area Graphene Patterns by Coffee-Ring Lithography

Lowering Interface State Density in Carbon Nanotube Thin Film Transistors Through Using Stacked Y2O3/HfO2 Gate Dielectric