Abstract:This study explores the influence of chemical composition and cooling rate on the microstructural formation of Al-based alloys, predominantly alloyed with Mn and Ce. Approximately 1 kg of the alloys with varying alloying element content was prepared in a protective resistance furnace. The solidified alloys were then sectioned into 100 g pieces, remelted, and cast into massive copper molds, resulting in samples with different thicknesses ranging from 0.3 to 6 mm. The cooling rates were precisely determined using numerical simulation, ranging from 10 3 to 10 4 K/s. The experimental results demonstrate that, at moderately high cooling rates (above 10 3 K/s), the primary intermetallics precipitated were identified as Al 20 Mn 2 Ce. However, at lower cooling rates, particularly when the Mn and Ce content were high, the formation of the "τ"-phase, Al 8 Mn 4 Ce, was observed and characterized by its detrimental dendrite-like morphology. Interestingly, as the cooling rate approached 10 5 K/s and in the presence of an optimal chemical composition (with sufficiently high Mn and Ce content), an amorphous structure formed at the outer surface of the samples. This amorphous structure exhibits intriguing potential for certain applications due to its unique properties. The desirable microstructure of bulk samples consists of submicron intermetallic compounds embedded in a boundary-free Al-matrix, which is promising for enhancing material strength and performance. This investigation sheds light on the crucial role of chemical composition and cooling rate in controlling the microstructural features of Al-based alloys, thereby providing valuable insights for the development of advanced materials with tailored properties for specific industrial applications. The role of rare earth metals (Ce and La) as poisoning and GFA (glass-forming ability) contributing elements is clarified. The Widmanstätten structure, appeared in the presence of high content of Mn, is discovered.

Evolution of local atomic structure during solidification of Fe-RE (RE=La, Ce) alloy

Ab initio study of local structures during cooling of liquid Fe-C and Fe-Cr-C alloys

Effects of RE (La, Ce) on fcc-bcc martensitic transformation of iron via Bain transformation path

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Glass Forming Ability and Crystallization Behavior of Al–Ni–RE Metallic Glasses

The influence of La and Ce additions on the solidification of alloys from the Al–Fe system

Impact of local chemical order on the structure evolution of dual-phase high-entropy alloy during solidification process

Glass Formation and Microstructure Evolution in Al–Ni–RE (RE = La, Ce, Pr, Nd and Misch Metal) Ternary Systems

Effect of Addition of La and Ce on Solidification Behavior of Al-Cu Alloys

Effect of rare earth La–Ce on solidification structure of 3.2%Si-0.9%Al non-oriented silicon steel

Effect of Rare Earth on Microstructure of Γ-Tial Intermetallics

The Local Orientational Orders and Structures of Liquid and Amorphous Metals Au and Ni During Rapid Solidification

Element Interactions and Local Structure in Molten NiRe and NiAlRe Alloys: Implications for the Aggregation and Partition of Re

Primary Crystallization of Al–Ni–RE Amorphous Alloys with Different Type and Content of RE

Microstructure Formation of Al-Based Alloys in the Presence of Rare Earth Metals (Ce, La) and Mn under High Cooling Rate

Local Atomic Structure Evolution of Liquid Gadolinium and Yttrium During Solidification: an Ab Initio Study

First-principles study of the mixing effects of rare earth solute atoms on the physical properties of Al2RE phases in Al-based alloys at finite temperatures

Solidification Structure Formation in Undercooled Fe–Ni Alloy

Atomic Structural Competition in the Al 85.5 Ni 9.5 La 5 Alloy During Liquid-to-Solid Transition

Solidification Structure Of Undercooled Alloys

Structure Evolution Upon Non-Equilibrium Solidification of Bulk Undercooled Fe–B System