Abstract:Al-Si alloys have been widely used in electronic information, communication and other fields because of their high specific strength, excellent castability and good thermal conductivity. In recent years, with the rapid development of 5G communication technology, electronic communication equipment is gradually developing towards high integration and lightweight. The power of related equipment is higher and higher, which puts forward higher requirements for thermal conductivity and mechanical properties of materials. Si can improve the fluidity and strength of the Al-Si alloy, but a large amount of Si will aggravate the lattice distortion and promote the increase of eutectic Si. This will reduce the plasticity of the alloy, increase the electron scattering and reduce the thermal conductivity. In order to improve the mechanical properties and thermal conductivity of Al-Si alloys, chemical inoculation is generally used. Sr is usually used as modifier and Al-B is as grain refiner. However, the simultaneous addition of Sr and B in Al-Si alloy results in "poisoning" phenomenon, it is impossible to refine α- Al grains and modified eutectic Si simultaneously. In recent years, rare earth La has attracted more and more attention in improving the properties of aluminum alloys. However, previous studies have mainly focused on the effects of La addition, the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy is lack. In this work, solidification experiments were performed to investigate the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy. The results show that the addition of trace rare earth La can effectively eliminate the poisoning effect of Sr and B, and enhance the modification effect of eutectic Si. Besides, La addition can promote the formation of α-Al heterogeneous nucleation substrate LaB6 and La can be used as a surfactant to reduce the undercooling of α-Al nucleation, thus it refines α-Al grains. The thermal conductivity of the alloy is significantly improved when the addition of La ranges from 0.02% to 0.06%, with the further increase of La addition, LaAlSi intermetallic compounds are formed in the alloy, leading to a decrease in the thermal conductivity of the alloy.

The influence of La and Ce additions on the solidification of alloys from the Al–Fe system

Influence of La additions on solidification and microstructure in the as-cast state of the aluminium alloy EN AW-7175

The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys

High-Pressure Die Casting of Al–Ce–La–Ni–Fe Alloys

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Effects of Variable La/Ce Ratio on Microstructure and Mechanical Properties of Mg-5al-0.3mn-1re Alloys

Effects of La and Ce on the Microstructure, Thermal Conductivity and Strength Synergy of the As-Extruded Mg-Mn-RE Alloys

Effect of trace rare earth La on microstructure and properties of Al-7Si-0.6 Fe alloy

Effect of CeLa addition on the mechanical properties of Al–Cu–Mn–Mg–Fe alloy

Influence of minor addition of La and Ce on the ageing precipitation behavior of Sr-modified Al-7Si-0.6Mg alloy

Influence of Ce on microstructure and mechanical properties of LA141 alloys

Effect of Ce/La Microalloying on Microstructural Evolution of Mg-Zn-Ca Alloy During Solution Treatment

Effect of partial substitution of Ce for La on the structural, magnetic and abnormal thermal expansion properties of La1-Ce Fe11.2Al1.8 alloys

Effect of Addition of La and Ce on Solidification Behavior of Al-Cu Alloys

Effect of La on the Microstructures and Mechanical Properties of Al-5.4Cu-0.7Mg-0.6Ag Alloys

Effect of Rare Earth on Microstructure of Γ-Tial Intermetallics

Microstructure Formation of Al-Based Alloys in the Presence of Rare Earth Metals (Ce, La) and Mn under High Cooling Rate

Effects of Mischmetal Composition and Cooling Rates on the Microstructure and Mechanical Properties of Al-(Ce, La, Nd) Eutectic Alloys

Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting

Effects of Ce-rich RE on Microstructure and Mechanical Properties of As-Cast Mg-8Li-3Al-2Zn-0.5Nd Alloy with Duplex Structure

Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys