Abstract:The hydraulic jump phenomenon plays a significant role in dissipating the energy of the upstream current in either natural or artificial waterways. River’s bed roughness is defined as a key parameter that affects the characteristics of the hydraulic jump. In this study, a non-linear regression algorithm was developed to predict the sequent depth ratio of hydraulic jumps over a smooth and rough bed surface using the experimental hydraulic data extracted from the previous studies. Four popular machine learning techniques, known as adaptive network-based fuzzy inference system (ANFIS), ANFIS-Particle Swarm Optimization (ANFIS-PSO), bayesian model averaging (BMA), least absolute shrinkage and selection operator (LASSO), are applied to check the accuracy of the proposed algorithm. The dimensional analysis and Gamma Test model are used to select the effective parameters on the hydraulic jump. In this study, four major parameters named the roughness height (ks), hydraulic radius (R), velocity and Froude number at the upstream of the hydraulic jump control volume were selected as more effective parameters. To compare the performance of the models in prediction of both sequent hydraulic depths, the coefficient of determination, root mean square error (RMSE), mean error, Mean Absolute Error and Nash–Sutcliffe efficiency (NSE) were calculated in both training and testing subsets. It is shown that the proposed model, along with two other non-linear methods, ANFIS and ANFIS-PSO, predicted the hydraulic jump sequent depth ratio more accurately compared to the linear regression techniques, BMA and LASSO. However, the statistical measures show an acceptable accuracy for the linear regression techniques. The results show that the proposed model increases the correlation between observed and predicted values up to 0.987 and decreases the RMSE to 0.324. Simultaneously, the last two linear techniques have RMSE, correlation coefficient 0.333 and 0.98, respectively. Finally, a new non-linear formula addressing the hydraulic jump sequent depth ratio over smooth and rough beds have been proposed. A comparison between the resulted formula of the present study with the previous studies proves the accuracy of the developed equation. Moreover, a dimensionless primary roughness coefficient is presented as a non-linear function of the roughness height (ks) and hydraulic radius (R) parameters.

Comparison of Artificial Neural Networks and Genetic Algorithms for Predicting Liquid Sloshing Parameters

Numerical Study of Rectangular Tank with Sloshing Fluid and Simulation of the Model Using a Machine Learning Method

Application of artificial neural network to predict slug liquid holdup

Combined APSO-ANN and APSO-ANFIS models for prediction of pressure loss in air-water two-phase slug flow in a horizontal pipeline

Prediction of Pressure Evolution in Non-Venting Self-Pressurized Liquid Hydrogen Tanks Using Artificial Neural Network Approach

Prediction of fluid pattern in a shear flow on intelligent neural nodes using ANFIS and LBM

Neural Network Models of Maximum Fluctuation of Water Surface in Ship Lift Chamber with Tumble Gate Operating

Artificial neural network aided vapor–liquid equilibrium model for multi-component high-pressure transcritical flows with phase change

Neural network-based reduced-order modeling for nonlinear vertical sloshing with experimental validation

Neural Network Model To Predict Slug Frequency of Low-Viscosity Two-Phase Flow

Measurement of intelligent computing via Levenberg Marquardt algorithm (LMA) for accurate prediction of fluid forces in a transient non-Newtonian thermal flow

A novel artificial neural network-based interface coupling approach for partitioned fluid–structure interaction problems

Comparative Study on the Machine Learning and Regression-Based Approaches to Predict the Hydraulic Jump Sequent Depth Ratio

Prediction of liquid bridge rupture between two plates combining artificial neural network with grey wolf optimization algorithm

Liquid droplet entrainment in an annular flow boiling regime—A Bayesian regularization algorithm based study

Discharge Coefficient Prediction of Canal Radial Gate Using Neurocomputing Models: an Investigation of Free and Submerged Flow Scenarios

Hybrid Artificial Intelligence Methods for Predicting Air Demand in Dam Bottom Outlet

AI-based predictive approach via FFB propagation in a driven-cavity of Ostwald de-Waele fluid using CFD-ANN and Levenberg–Marquardt

Surrogate Model with a Deep Neural Network to Evaluate Gas–Liquid Flow in a Horizontal Pipe

Performance and application analysis of ANFIS artificial intelligence for pressure prediction of nanofluid convective flow in a heated pipe

Laboratory measuring of contact angles for liquid/solid surface and analysis with artificial neural network