Abstract:This study investigates the impact of aluminum doping on Li1.26Ni0.15Mn0.61O2, a lithium‐rich, cobalt‐free layered oxide. The undoped material has a monoclinic structure, while the Al‐doped materials contain a more stable rhombohedral phase at the particle edges. This work quantitatively elucidates the stabilizing effect of the rhombohedral shell, shedding light on mechanisms that enhance the electrochemical stability of lithium‐rich layered oxides. Lithium‐rich, cobalt‐free oxides are promising potential positive electrode materials for lithium‐ion batteries because of their high energy density, lower cost, and reduced environmental and ethical concerns. However, their commercial breakthrough is hindered because of their subpar electrochemical stability. This work studies the effect of aluminum doping on Li1.26Ni0.15Mn0.61O2 as a lithium‐rich, cobalt‐free layered oxide. Al doping suppresses voltage fade and improves the capacity retention from 46% for Li1.26Ni0.15Mn0.61O2 to 67% for Li1.26Ni0.15Mn0.56Al0.05O2 after 250 cycles at 0.2 C. The undoped material has a monoclinic Li2MnO3‐type structure with spinel on the particle edges. In contrast, Al‐doped materials (Li1.26Ni0.15Mn0.61‐xAlxO2) consist of a more stable rhombohedral phase at the particle edges, with a monoclinic phase core. For this core‐shell structure, the formation of Mn3+ is suppressed along with the material's decomposition to a disordered spinel, and the amount of the rhombohedral phase content increases during galvanostatic cycling. Whereas previous studies generally provided qualitative insight into the degradation mechanisms during electrochemical cycling, this work provides quantitative information on the stabilizing effect of the rhombohedral shell in the doped sample. As such, this study provides fundamental insight into the mechanisms through which Al doping increases the electrochemical stability of lithium‐rich cobalt‐free layered oxides.

Enhanced Cycling Stability of Al-Doped Li 1.20 Mn 0.52- x Al x Ni 0.20 Co 0.08 O 2 as a Cathode Material for Li-Ion Batteries by a Supercritical-CO 2 -Assisted Method

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Enhancing High Cycle Stability of Ni-rich LiNi0.94Co0.04Al0.02O2 Layered Cathode Material

Enhanced cyclic performance of O2-type Mn-based layered oxide via Al doping for lithium-ion battery

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Enhanced Electrochemical Performance of 0 . 4 Li 2 MnO 3-0 . 6

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO2 for lithium ion battery

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Al Substitution for Mn during Co-Precipitation Boosts the Electrochemical Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Aluminum-doping induced micro-porous structure and improved anion redox reversibility in cobalt-free lithium-rich cathode materials for its enhanced electrochemical performance

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium‐Rich Cobalt‐Free Layered Oxides for Lithium‐Ion Batteries

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries