Abstract:Ceramic materials with low thermal conductivity are critically important in applications such as thermoelectric conversion and thermal barrier coatings. Introducing the concept of entropy and its singular physical properties permits attainment of low thermal conductivity in ceramics, and the high-pressure synthesis conditions can also reduce the thermal conductivity of the synthesized samples by adjusting the micro-morphology. In this work, high-entropy (Sr0.2La0.2Nd0.2Sm0.2Eu0.2)TiO3 ceramics were synthesized by solid-state reaction at high temperature and high pressure, which significantly shortened the synthesis time. X-ray diffraction (XRD) results affirmed that high-entropy cubic perovskite ceramics can be synthesized using high temperature and high pressure. High-resolution transmission electron microscopy (HRTEM) results show that the multi-component cations are uniformly distributed at the A-site. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results show that the pressure provided by the synthesis method can effectively adjust the microstructure of the synthesized samples. Ultra-low thermal conductivity was obtained by synthesizing high-entropy samples under high pressure; the lowest thermal conductivity of resulting high-entropy (Sr0.2La0.2Nd0.2Sm0.2Eu0.2)TiO3 perovskite ceramics was 0.82 Wm−1 K−1 at the test temperature of 973 K, which is the lower value of perovskite strontium-titanate-based ceramics reported in the literature at present. The high-entropy perovskite ceramics prepared by this new high-temperature and high-pressure method also have good mechanical properties, with Vickers hardness of 10.05 GPa. This study provides a new synthesis strategy for the rapid and effective synthesis of perovskite ceramics with low thermal conductivity, which is a new method for the synthesis of high-entropy materials.

Fabrication of high-entropy perovskite oxide by reactive flash sintering

Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering

High Entropy Oxide Phases with Perovskite Structure

Reactive Flash Sintering of High-Entropy Oxide (Mg, Co, Ni, Cu, Zn)1−xLixO at Room Temperature

Change in the compositional distribution in perovskite solid solutions during the sintering by SPS

High-Entropy Perovskites Pr1−xSrx(Cr,Mn,Fe,Co,Ni)O3−δ (x = 0–0.5): Synthesis and Oxygen Permeation Properties

Rapid and direct synthesis of complex perovskite oxides through a highly energetic planetary milling

Hydrothermal Synthesis of a Valence State Constant High-Entropy Perovskite Sr(TiZrHfVNb)O3 with Improved Photoresponsiveness

The effect of non-equimolar doping on the preparation and electrical conductivity of Sr(Ti,Zr,Zn,Sn,Hf)O3-σ high entropy perovskite oxide

Preparation of high entropy ceramics with ultra-low lattice thermal conductivity using the high-pressure and high-temperature method

Rapid synthesis of high entropy perovskite oxides with oxygen vacancies at high pressure for thermoelectric applications

On the synthesis and formability of high-entropy oxides

Reactive Flash Sintering of High-Entropy Oxide (Mg, Co, Ni, Cu, Zn)(1-x)LixO at Room Temperature

Efficiently Preparing Structure-Controllable High Entropy Anodes Via Computation-Guided Sintering in an Optimized Flash Furnace

The influence of Sc3+ doping on the crystal structure and electrical conductivity of Sr(Ti0.2Zr0.2Y0.2Sn0.2Hf0.2)O3-σ high-entropy perovskite oxides

Synthesizing Functional Ceramic Powders for Solid Oxide Cells in Minutes Through Thermal Shock

Microstructure and dielectric properties of high entropy Ba(Zr0.2Ti0.2Sn0.2Hf0.2Me0.2)O3 perovskite oxides

Fabrication and performance investigation of high entropy perovskite (Sr0.2Ba0.2Bi0.2La0.2Pr0.2)FeO3 IT-SOFC cathode material

High-Entropy Lead-Free Perovskite Bi0.2K0.2Ba0.2Sr0.2Ca0.2TiO3 Powders and Related Ceramics: Synthesis, Processing, and Electrical Properties

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

ZnO as sintering aid and reactant for reactive flash sintering at room temperature