Abstract:The cement industry is one of the primary sources producing anthropogenic CO2 emissions. The significant increase in the demand for cement in years has significantly contributed to the increase in carbon emissions. Among numerous CO2 treatment technologies, calcium looping (CaL) is a practical approach to mitigating CO2 emissions. This paper used calcium looping (CaL) to capture CO2 from flue gas in a cement pre-calciner kiln system. The raw material exiting the lowest stage of the preheater is used as a calcium-based adsorbent, and the carbonation reactor is built between the tertiary and secondary preheaters, using the high-temperature flue gas exiting the tertiary preheater to provide heat for the reaction. The CFD (Computational Fluid Dynamics) simulation technology was used to evaluate the rationality of the carbonation reactor and the key factors affecting the carbon removal efficiency of the carbonation reactor. The results indicate that the velocity and pressure fields of the carbonation reactor conform to the general operating rules and are reasonable. The optimal operating speed of particles in the carbonation reactor is 15 m/s, with a separation efficiency of particles of 92.5%, ensuring the smooth discharge of reaction products. The factor analysis of the carbonation reactor shows that when the temperature is 911 K, the mass flow rate of CaO is 2.07 kg/s, and the volume fraction of CO2 is 0.28, the carbonation reaction reaches a chemical equilibrium state, and the carbon removal efficiency is 90%. It should be noted that this carbon removal efficiency is the optimal carbon removal efficiency based on a combination of economic factors. In addition, the influencing factors show a precise sequence: CO2 volume fraction > CaO addition amount > temperature. Finally, we investigated the impact of the addition of the carbonation reactor on the preheater system. The results show that adding the carbonation reactor causes an increase in the flue gas velocity at the outlet of the preheater and a decrease in pressure, reducing the separation efficiency. Although the separation efficiency decreases slightly, the impact on the pre-calciner system is minimal.

CFD simulation of a cement precalciner with agglomerate-based drag modeling

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

CFD-DEM Study on the Synergistic Effect of Coke Consumption and Particle Dynamics in the Blast Furnace Raceway

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD Simulation of the Steam Gasification of Millimeter-Sized Char Particle Using Thermally Thick Treatment

Numerical Study of Particle Behaviours and Heat Transfer in a Complex Rotary Kiln

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Particle-scale and Sub-Grid Drag Models Coupled CFD for Simulating the CO Methanation in a CFB Riser

Simulation and optimization of the particle agglomeration in an aerodynamic agglomerator using a CFD-PBM coupled model

Slagging behavior modeling in coal gasifiers using two-way coupled slag model with CFD

Numerical Simulation of Molten Slag Deposition in Radiant Syngas Cooler with a CFD-Based Model

Modeling of Cluster Structure-Dependent Drag with Eulerian Approach for Circulating Fluidized Beds

CFD simulation of gas-solid flow with a cluster structure-dependent drag coefficient model in circulating fluidized beds

Numerical Study of Gas-Solid Flow in A Precalciner Using Kinetic Theory of Granular Flow

Numerical Analysis of the Operating Characteristics of a Large‐scale CFB Coal‐gasification Reactor with the QC‐EMMS Drag Model

Numerical Simulation of CO2 Extraction from the Cement Pre-Calciner Kiln System

CFD Modelling of Calcination in a Rotary Lime Kiln

A Model to Improve Granular Temperature in CFD-DEM Simulations

Numerical Simulation of Flow Behavior of Particles and Clusters in Riser Using Two Granular Temperatures

Numerical Simulation of Fly Ash Deposition in Coal and Corn Stalk Co-Combustion with Dynamic Mesh Technique