Abstract:Carbon capture, as a core technology for mitigating greenhouse gas emissions, the greatest challenge is the balance between separation performance and energy consumption. This study seeks to evaluate and screen the separation performance and energy consumption of four typical adsorbents (13X, Mg-MOF-74, activated carbon, and Lewatit VP OV 1065) in vacuum temperature swing adsorption (VTSA) and vacuum swing adsorption (VSA) through optimization approach, which will support in-depth research and decision-making on adsorption processes. A non-isothermal non-adiabatic numerical model was carried out to describe a novel 4-bed 10-step VTSA cycle developed on an exchange type adsorption unit (ETAU), and the model was validated by binary breakthrough and temperature swing experiments. A 4-bed 10-step VSA cycle was in turn established and investigated. Parametric analysis of the two cycles was performed by varying the operating variables including feed gas flow rate, recycle time, and purge-to-feed ratio. Process optimization of the multiplicative fraction evaluation function, simultaneously considering purity, recovery, and productivity, was achieved using a dual convergence algorithm. Results showed that all four adsorbents could achieve more than 90 % purity and recovery on the VTSA process employing the ETAU for post-combustion carbon capture, and the separation performance was substantially superior to that of the VSA cycle. Mg-MOF-74 obtained a CO 2 product with 97.90 % purity, 98.48 % recovery, and 5.48 mol/kg ads /hr productivity at a desorption temperature of 383.15 K; it has a specific heat consumption of 1.45 GJ th /ton and a specific power consumption of 0.55 GJ el /ton. The total energy consumption of 13X was slightly lower than that of amine adsorbents, giving 95.00 % purity, 97.60 % recovery, and 1.91 mol/kg ads /hr productivity. Relatively low desorption temperature is expected to introduce ultra-low-grade waste heat for partial heat source substitution, contributing to the energy sustainability of adsorption carbon capture technology.

Performance analysis of solar-assisted CO2 adsorption capture system based on dynamic simulation

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Comparative Analysis on Temperature Swing Adsorption Cycle for Carbon Capture by Using Internal Heat/mass Recovery

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

Dynamic Simulation of Post-Combustion Capture System

Dynamic Operation and Simulation of Post-Combustion CO2 Capture

Dynamic modelling and simulation of a post-combustion CO2 capture process for coal-fired power plants

A High Adsorption Capacity Bamboo Biochar for CO2 Capture for Low Temperature Heat Utilization

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

Techno-Economic Evaluation on Solar-Assisted Post-Combustion CO2 Capture in Hollow Fiber Membrane Contactors

Solar thermal swing adsorption on porous carbon monoliths for high-performance CO2 capture

Steam-assisted Temperature Swing Adsorption for Carbon Capture Integrated with Heat Pump

Flexibility Analysis on Absorption-Based Carbon Capture Integrated with Energy Storage

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Dynamic process simulation and optimization of CO2 removal from confined space with pressure and temperature swing adsorption

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration