Abstract:A novel flower-like 0.1%WO3/CeO2(f) catalyst with high-efficiency was fabricated for the selective reduction of NOx by NH3. In contrast to traditional WO3/CeO2, this catalyst exhibited a significant SCR performance of 90% NOx conversion and 95% N2 selectivity within a wide temperature range of 175-450.C and great H2O and/or SO2 resistance under a high GHSV of 177,000 h 1. A variety of analytical techniques including SEM, XRD, XPS, NH3-TPD, H2-TPR and in situ DRIFTS-MS were employed for the catalysts characterization to fully understand the reaction mechanism over WO3/CeO2 catalysts. It was found that the flower-like structure promoted a more uniform dispersion of tungsten species on the support and a stronger interaction between WO3 and CeO2, thereby increasing the acid sites and surface vacancies. Moreover, more chemical active oxygen and trivalent cerium species were presented on 0.1% WO3/CeO2(f). In situ DRIFTS-MS and H2-TPR revealed that the reducibility was optimized for 0.1% WO3/CeO2(f). Then NH3 oxidation species could react with gaseous or adsorbed NOx during Eley-Rideal (E-R) pathway for 0.1%WO3/CeO2(f) at a high temperature (300. C). Meanwhile, NOx was reduced into more active bridged nitrates participating in the reaction via Langmuir-Hinshelwood (L-H) route, contributing to its superior deNOx performance. In comparison, the formation of inert adsorbed NH3 oxidization/ deformation species and bridged nitrates suppressed the SCR reaction over 0.1%WO3/CeO2, resulting in its inferior deNOx activity. This study not only provides a new strategy for developing high-efficiency ceria supported NH3-SCR catalyst, but also lays a foundation for investigating the reaction mechanism of cerium-based catalyst for further practical applications.

Selective catalytic reduction of NO with NH3 over core-shell Ce@W catalyst

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

A Superior Cerium-Tungsten Bimetal Oxide Catalyst with Flower-Like Structure for Selective Catalytic Reduction of NO by NH3

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range

Monolith Ce0.65zr0.35o2-Based Catalysts for Selective Catalytic Reduction of No with Nh3

Characterization of CeO2–WO3 Catalysts Prepared by Different Methods for Selective Catalytic Reduction of NOx with NH3

Manganese Doped CeO2–WO3 Catalysts for the Selective Catalytic Reduction of NO with NH3: an Experimental and Theoretical Study

Selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub> over a novel Co-Ce-Ti catalyst

Mechanism of Selective Catalytic Reduction of NOx with NH3 over CeO2-WO3 Catalysts

Catalytic Performance of Highly Dispersed WO3 Loaded on CeO2 in the Selective Catalytic Reduction of NO by NH3

Novel W-Modified Snmnceox Catalyst for the Selective Catalytic Reduction of Nox with Nh3

Three-dimensionally ordered macroporous Ce-W-Nb oxide catalysts for selective catalytic reduction of NO with NH3

NH3-SCR Performance of WO3 Blanketed CeO2 with Different Morphology: Balance of Surface Reducibility and Acidity

Influence of CeO2 morphology on WO3/CeO2 catalyzed NO selective catalytic reduction by NH3

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia

Effects of WO3 and SiO2 Doping on CeO2–TiO2 Catalysts for Selective Catalytic Reduction of NO with Ammonia

Ordered mesoporous TiO2/SBA-15 confined CexWy catalyst for selective catalytic reduction of NO with NH3

Oxygen-vacancy mediated acidity and redox properties on WOx/Cu-doped CeO2 for the removal of NOx

A Ce–Cu–Ti oxide catalyst for the selective catalytic reduction of NO with NH3

Wood-inspired high-performing hierarchical porous Ce0·7Zr0·3O2 catalyst for low-temperature selective catalytic reduction of NOx by NH3

Excellent low-temperature NH3-SCR of NO activity and resistance to H2O and SO2 over WaCeOx (a=0.06, 0.12, 0.18, 0.24) catalysts: Key role of acidity derived from tungsten addition