Abstract:Cylindrical and diffuser-shaped film cooling holes on aero-engine turbine blades are usually machined by electrical discharge machining (EDM) by means of drilling and die-sinking approaches in a sequence. However, this sequential machining on different types of EDM machines is prone to deteriorate the machining accuracy since the inevitable secondary clamping error. Besides, since the nature of electrode wear, the shape of the tip of tool electrode is constantly changing during machining. To ensure the geometry accuracy of the diffuser, the worn tool electrode has to be replaced or dressed online frequently, resulting in a low machining efficiency. To address these problems, this paper proposes a machining method for diffuser shaped film cooling holes by a compound approach in combination of high speed EDM drilling and milling implemented on an EDM drilling machine with tubular electrodes and high-pressure inner flush. To obtain the optimal machining parameters, experimental investigation is carried out based on the experimental design method. Machining performance in terms of longitudinal tool electrode wear ratio, machining time, and machining stability under different machining parameters, such as pulse duration, pulse interval, peak current, capacitance, spindle speed, and flushing pressure, were taken into account. And the range analysis method is then adopted to obtain an optimal set of machining parameters. By applying the obtained optimal machining parameters, the proper compensation parameter and tool path overlapping ratio of the EDM milling process can be obtained. In the milling of an inversed pyramid, the material removal rate can reach as high as 14.02 mm3/min, the relative geometrical error can be controlled within 3.58%, and the maximum recast layer thickness was 6.8μm. Machining experiments of diffuser shaped film cooling holes verify the capability and effectiveness of the proposed method.

Experimental Study on Step-by-Step Electrical Discharge Machining of Square Blind Holes in TC4 Titanium Alloy

Curved Profiles Machining of Ti6Al4V Alloy Through WEDM: Investigations on Geometrical Errors

Research on efficient electrical discharge machining trepanning technology of TC4 titanium alloy hole

A study on ultrasonic-assisted micro-EDM of titanium alloy

Machining efficiency and geometrical accuracy on micro-EDM drilling of titanium alloy

Research on electrochemical discharge milling of TC4 titanium alloy

Editors' Choice—Improving Quality of EDMed Micro-Holes on Titanium via In Situ Electrochemical Post-processing: A Transient Simulation and Experimental Study

Micro-EDM of micro-stepped hole based on the wear of micro-bit

Study on the Effect of Electrolytes on Processing Efficiency and Accuracy of Titanium Alloy Utilizing Laser and Shaped Tube Electrochemical Machining

Comparative Study of Ultrasonic Vibration-Assisted Die-Sinking Micro-Electrical Discharge Machining on Polycrystalline Diamond and Titanium

Experimental research and multi-objective optimization of ultrasonic vibration–assisted EDM for Ti6Al4V micro-holes

Experiments of Ti6Al4V manufactured by low-speed wire cut electrical discharge machining and electrical parameters optimization

A study on Electrical Discharge Machining of Titanium Grade2 with experimental and theoretical analysis

Electrical discharge drilling of blind holes with injection flushing dielectric and stepped electrodes

Research on machining Technology of Electrospark-electrochemical Hybrid Energy Field with tungsten hole

Determination of the Accuracy of Holes produced by Deep Drilling of Ti-6Al-4V Titanium Alloy

The effect of ultrasonic amplitude on the performance of ultrasonic vibration-assisted EDM micro-hole machining

Investigation on Surface Roughness and MRR in WEDM of Titanium Grade 7 (Ti-0.15Pd) Alloy using Statistical Techniques

Experimental study of EDM milling of 3D-shaped diffuser for film cooling holes on turbine blades

EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions

Study on Ultra-Precision Processing of Ti-6Al-4V with Different Ultrasonic Vibration-Assisted Cutting Modes